Castrol Metal Cutting Lubricants

A fully synthetic soluble cutting fluid, intended for grinding ferrous metals. Has excellent health and safety characteristics, containing no mineral oil, phenols or sodium nitrite. Combines outstanding grinding characteristics with good operator acceptability and wide application in general machining. In general grinding operations, it permits a high surface finish to be achieved while ensuring long wheel life. It has good anti-corrosion properties in soft and hard waters and is compatible with all metals.

Syntilo™ 22 Fully Synthetic Soluble Cutting Fluid - 20ltr

Q8 Cutting Oils

High performance neat cutting oil providing excellent tool life and surface finish. For multiple machining applications: milling, drilling, thread grinding, broaching, gear hobbing, etc. Multi-metal applications: ferrous and non-ferrous metals. Non-staining on non-ferrous metals. A clear, pale yellow straight cutting fluid manufactured from solvent refined mineral oil and blended with fatty oil and chlorinated additives. Ensures good tool life and cutting performance. A wide range of duties may be performed using this oil, for apart from its application to automatic and multi-tool lathes handling the higher tensile steels, Ilocut 486 is suitable for such specialised operations as production thread grinding, broaching and multi-cutter milling set-ups. Castrol Ilocut 486 is suitable for both ferrous and non-ferrous materials, high tensile steels, Inconel, high nickel and stainless steel. Castrol Ilocut 486 is suitable for general use on automatic and multi-tool lathes, production thread grinding, broaching, multi-cutter milling and gear hobbing (Gleason Revacycle). Guard against water entry.

Features:
Chlorinated and fatty additives.
High performance product.
Non staining to non ferrous alloys.
Versatile product.

Benefits:
Protects against premature dulling and a smooth chip take-off is assured.
Excellent rationalisation grade.
Promotes prolonged tool life and improved surface finish.

Ilocut 486 Neat Cutting Oil

Hysol™ G100 Semi-synthetic Soluble Metal-working Fluid

A low oil semi-synthetic specialist grinding fluid for the majority of grinding applications, especially formulated from the latest technology high performance additives, for grinding and light duty machining applications on most materials. It has been specifically designed to combine the benefits of synthetic grinding fluids without the associated drawbacks. Suitable for use on all ferrous and non-ferrous materials. Long life coolant with inherently low foam characteristic which makes it ideal for use in large centralised coolant systems and single sump machines.

Features:
* Optimised lubricity additives.
* Advanced surfactant package.
* Low foam.
* Advanced bio-stability package.

Benefits:
* Enhanced component quality and reduced wheel dressings.
* Keeps grinding wheels clean and open, thereby maintaining dimensional accuracy.
* Eliminates the use of expensive anti-foams and reduces maintenance.
* Long sump life and reduced machine downtime.

Castrol Lubricants and Cutting Fluids

Castrol CareCut ES2 is formulated using advanced biodegradable ester based technology it can be used with all types of grinding media, but is especially effective with CBN grinding. It is suitable for severe grinding, form grinding and gear grinding. It is suitable for all ferrous and non-ferrous metal machining but is particular suitable for boring operations in general deep hole drilling, boring and trepanning where pressurised coolant systems are used to clear swarf quickly.

Features:
Very high lubricity.
Biodegradable.
Chlorine-free.
Pale colour and low odour.
Low misting.
High flash point.

Benefits:
Improved tool life, surface finish and productivity (increased G ratio).
Environmentally friendly.
Pleasant to use.
Improved health and safety.

CareCut ES2 Cutting and Grinding Lubricant

Castrol Hysol T15 Cutting Oil

Formulated to ensure exceptional steel cutting characteristics. Can be used on a variety of other metals including stainless steel. The product has a natural tendency to reject tramp oil which overcomes problems associated with its ingress into soluble cutting fluids.

T15 Cutting Oil

Available in 20ltr and 208ltr.

Carecut ES1 Machining & Grinding Fluid

A biodegradable cutting fluid and has been formulated using specially selected advanced biodegradable esters. Primarily designed for heavy duty machining applications where the highest quality surface finish is required and has also been successfully used to improve productivity by increasing machine feeds. On selected applications, productivity increases have been improved by over 70% compared with traditional products without any loss of tool-life.

Features:
Chlorine-free.
Biodegradable.
Low misting.
Low smoking.
High flash point.
Pale colour.
Low odour.
Improved surface finish.
Improved tool life.

Benefits:
Environmentally friendly.
H & S/user friendly.
Improved engineering and productivity.

Castrol Metal Cutting Lubricants

Chlorine, nitrite and phenol free synthetic grinding fluid. Specially formulated for the grinding of tungsten carbide. Excellent wetting properties. Resistance to all types of corrosion. High resistance to bacterial and fungal growth. Low foam in water conditions.

Syntilo CR27

Hysol MB50 Soluble Cutting Oil

Excellent bio-stability reduces biocide usage. Multi-purpose capability - suitable for use on ferrous and non-ferrous materials (not cast iron). Environmentally conscious - Boron, Sulphur and Chlorine free. Hard and soft water capability - low foam and good emulsion stability in all water conditions.

Castrol Hysol™ Excel Cutting Fluid

Long life, semi-synthetic soluble cutting fluid. Multi-purpose machining applications: milling, drilling, tapping, grinding, etc. Multi-metal machining applications: ferrous and non-ferrous metals, aluminium, stainless steel, etc. Excellent tool life. Biostable properties which provide resistance to bacterial and fungal growth. Stable in hard and soft water. Chlorine free.

Hysol™ Excel Cutting Fluid

Available in 20kg, 54kg and 207kg.

Castrol Lubricants and Cutting Fluids

Castrol Hysol XF is a chlorine free, long life, multipurpose soluble metalworking fluid for general purpose machining, grinding and heavy duty applications. It is suitable for machining various materials including ferrous metals, aluminium, copper, and titanium. It is also suitable for aerospace aluminium alloys i.e. 2024 and 7075. Castrol Hysol XF incorporates advanced additive technology to prevent fungal and bacterial infections ensuring exceptional sump life. The product is suitable for use in central coolant systems and single sump machines.

Key features:
High performance lubricity and S Excellent tool life and extreme pressure additives surface finish
Versatile product - can be used to rationalise other grades on site
Advanced Biostability Package S Long sump life
Reduced maintenance
Chlorine - Free S Environmentally acceptable

RECOMMENDED USE CONCENTRATIONS
General Machining Operations 5%
Heavy duty operations 5-10%
Grinding operations 4 %

Hysol XF Soluble Cutting Fluid