Solent Flaw Detector Inspection System

Fast reliable method for visually inspecting and spot-checking surfaces of welds, exotic alloys or standard metals, highly stressed structural members, critical castings, shafts, gears, spindles, and any other hard part where identification of surface flaws is essential. Detects flaws such as cracks, pin holes, welding laps and porousness either during manufacture or on site. A three part system. SFD-501C is a cleaner. SFD-502C is a dye penetrant. SFD-503C is a developing fluid that reacts with the dye in SFD-502C to show small cracks in the weld. Each part supplied in an ozone friendly 500ml aerosol.

Flaw Detector Cleaner Spray

Quick drying, powerful solvent for cleaning surfaces prior to testing. Removes contaminants including oils, greases and grime.

Silicone Release Spray For Plastics & Rubber

Heavy duty Silicone lubricant and Release agent. Formulated with a high silicone content. The product is suitable for a wide range of uses. A dry non-oily, non-greasy product. Water clear with no odour. Size: 500ml aerosol.

Solent Flaw Detector Inspection System

Fast reliable method for visually inspecting and spot-checking surfaces of welds, exotic alloys or standard metals, highly stressed structural members, critical castings, shafts, gears, spindles, and any other hard part where identification of surface flaws is essential. Detects flaws such as cracks, pin holes, welding laps and porousness either during manufacture or on site. A three part system. SFD-501C is a cleaner. SFD-502C is a dye penetrant. SFD-503C is a developing fluid that reacts with the dye in SFD-502C to show small cracks in the weld. Each part supplied in an ozone friendly 500ml aerosol.

Flaw Detector Dye Penetrant

Highly sensitive red dye, for use when detecting flaws on metal components under normal lighting conditions.

Dry Film Mould Release P.T.F.E. Spray

Solent Mould Release PTFE Dry Film is a micro-thin surface coating that is used to coat the inner surfaces of injection moulding tools/dies. Thus enabling easy component release. The coating will not bridge complex mould profiles and will not interfere with precision fits. The applied PTFE film will not transfer to the moulded item. The product can also be used in any location that requires a dry slip surface such as production line slides, tracks or tables.

Solent Maintenance Aerosols

Within the Solent Maintenance range of aerosols you'll find electrical contact rapid cleaners, foam cleaners, multi purpose oils, penetrating sprays, rust protection, flaw detectors, weld anti splatter, mould release, drive belt dressing sprays and many more.

All are formulated to stringent standards of quality, to meet the demands of the commercial user!

Maintenance Spray

Solent Maintenance SM4-500C maintenance spray is ideally suitable for:

LUBRICATING - as it is a high performance mineral oil based lubricant with PTFE.
DISPLACES WATER - To help Start damp petrol engines.
PENETRATES - To allow easy release of rusty fixings.
CLEANS & PROTECTS - Cleans metal surfaces and prevents rusting of treated parts.

It does not contain naphtha, kerosene or paraffin which are all associated with operator skin dryness, cracking or dermatitis. It is electrically non-conductive at normal ranges found in the home. Care must be taken if used on some electrical plastic components where 'crazing' may occur. Test for suitability on painted surfaces before general application. A non-flammable CO2 propellant is used that in the large 500ml can size will deliver up to 15% more product than some 'like for like' butane propelled aerosols.

Does not contain silicone.

SOLENT Maintenance Welders Anti-Spatter Fluid - 5 Litres

Reduces the risk of joint puddling and greatly reduces preparation time prior to final painting. Does not affect any subsequent galvanising or painting operations. Evaporates under normal weld temperatures. Dichloromethane and silicone-free. Non-flammable, non-toxic, non-corrosive and biodegradable.
Dimensions (W x D x H): 185 x 135 x 283mm.
Weight: 5kg.

Rapid Penetrating Spray

Rapidly penetrates into rust and corroded fittings. Allows easy release and dismantling of fittings exposed to heat and great pressure. Can be used on wet metal components, does not contain Silicone, CFC's or Chlorine. Lubricates threads during release procedure, 30% less dense than water.

Chain & Drive Spray Lubricant

Formulated to have a wide range of operating uses. Ideal lubricant for moving chains under extreme load and for chains not fitted with automatic lubrication nor running in oil baths. Formulated with a "tacky additive" to resist "throw off" on rapidly moving chains and drives. Ideal for fork trucks/conveyer systems/motorcycle chains. Can be used as a general purpose lubricant for items subjected to extreme weather conditions. Can be used as a slideway lubricant for machine tools and has strong anti-rust qualities. Does not contain silicone or CFC's.

Drive Belt Dressing

Reduces slip on drive belts and helps to stop belt squeal. Can be used on drive belts exposed to weather, ideal for farm machines, alternator drive belts and fan belts. Helps to stop cracking and extends belt life. Can be used on rubber, leather, canvas and most types of synthetic belts. Size: 500ml Aerosol

Leak Detector Spray

A specially formulated, high performance, white fluid, designed specifically to identify even the smallest gaseous leak. Applies a thin uniform film of surface active agents which accurately identify any leak or bleeding of joints, bubbles in the applied film indicate the location of the leak. Aerosol enables fast and easy application. Convenient and accurate in difficult to reach areas. No wastage or spillage. Propelled by compressed air - will not give a false reading if mechanical sensing equipment is used. Long shelf life, unlike other CO2 propelled leak detector sprays, the pressure will not not drop off due to CO2 degradation during storage. Suitable for use with most common industrial gases including compressed air, acetylene, butane, propane, chlorine, hydrogen, and natural gas. Not recommended for use on medical equipment where there could be a risk of ingress into the patient airway. Supplied in a 400ml aerosol.