Anti Rust Protection Spray - For Tools and Packing

Solent Green Moisture Guard is a soft thin film moisture/ corrosion protective coating. Packed in a large 500ml aerosol. The coating has a slight green colouring which clearly indicates treated areas. Ideal for longer terms moisture/corrosion protection of machined components/moulding dies and tools. Removed easily with Solent Industrial Cleaner, part number SC1-500B.

Solent? Copper Grease Spray with Graphite

Components subjected to great heat and pressure during its operating life can easily be dismantled if SM7-500B is applied during assembly. SM7-500B is particularly effective on commercial/passenger vehicle braking systems. Extra heavy duty copper grease with graphite. High copper content. Effective up to 1100C. No lead content, no CFC's, no silicone, no chlorinated content. Fitted with directional spray button for precision application. Ideal for boiler fittings subject to heat. 500ml.

Drive Belt Dressing

Reduces slip on drive belts and helps to stop belt squeal. Can be used on drive belts exposed to weather, ideal for farm machines, alternator drive belts and fan belts. Helps to stop cracking and extends belt life. Can be used on rubber, leather, canvas and most types of synthetic belts. Size: 500ml Aerosol

Solent? Dry Moly EP Lubricant

The molybdenum disulphide lubricant particles are one micron or less in size allowing the product to adhere in the smallest surface irregularities. Fast drying at room temperature, the dry coating can be polished if required, to a high shine providing micro coating of lubricant for slides, bearings, chutes and conveyors. The dry film is resistant to pick up and resists the accumulation of debris. Ideal for fastener lubrication where it will prevent galling, particularly on stainless steel. Effective on foundry equipment where high temperatures up to 450C are common. Also suitable for open gear lubrication and any location where a wet coating is not acceptable or would burn off. Provides lubrication at extremely high load rates up to 100,000 psi. Suitable for all steels, copper, and brass components. No silicone content. Packed in a 500ml aerosol for economy in use.

Silicone Release Spray For Plastics & Rubber

Heavy duty Silicone lubricant and Release agent. Formulated with a high silicone content. The product is suitable for a wide range of uses. A dry non-oily, non-greasy product. Water clear with no odour. Size: 500ml aerosol.

Solent Flaw Detector Inspection System

Fast reliable method for visually inspecting and spot-checking surfaces of welds, exotic alloys or standard metals, highly stressed structural members, critical castings, shafts, gears, spindles, and any other hard part where identification of surface flaws is essential. Detects flaws such as cracks, pin holes, welding laps and porousness either during manufacture or on site. A three part system. SFD-501C is a cleaner. SFD-502C is a dye penetrant. SFD-503C is a developing fluid that reacts with the dye in SFD-502C to show small cracks in the weld. Each part supplied in an ozone friendly 500ml aerosol.

Flaw Detector Dye Penetrant

Highly sensitive red dye, for use when detecting flaws on metal components under normal lighting conditions.