Autotorch Brazing System

A portable bronze brazing system using only a single cylinder of propane. Automatic piezo-electric ignition plus interchangeable burners.

Burners

No 4103 giving the smallest, No 4105 the largest, flames. The burners must be used at 4 bar pressure and should not be turned down. If a smaller flame is required a smaller burner must be used.

Ultra Gas Canister

A blend of Propane, Butane, Acetone and Propene to achieve a flame temperature of more than 2100 degrees Celcius! Simply screw the canister into the threaded fitting inside the tool to install. Gas canisters to suit the Sievert 3380 Portable Soldering Iron.

Super-fire 2 Brazing Torch

Adjustable high temperature flame and turbine action burn tube.

3.5644X Super-fire 2 Brazing Torch

The ROTHENBERGER Super-Fire 2 soldering and brazing torch is the result of many years experience and provides the highest standards in concentrating high temperature for fast and effective soldering and brazing in the plumbing, heating, refrigeration, air conditioning and associated trades:

Instant automatic ignition
Guaranteed anti-flare
Long life piezo ignitor
Solid die cast torch body
Fine filtered jet
Professional performance
Works in any position - even upside down

No.1021 4.8mm Screwed Hose Connector

Bullfinch No.1021 screwed hose connector 3/8" BSP-LH female union x 4.8mm hose end.

No.3165 Unilow Furnace

The Bullfinch No.1365 Unilow Furnace is robustly designed with a wide low frame give great stability and safety. It incorporates an advanced design of air intake adjustment to give a wide range of flames from vigorous to soft - and more precise control of the heat. The burner design prevents jets becoming blocked by spillage.

Extension Tubes

For use between handle and burner for extending the reach. Can also be used in conjunction with multiple burner adaptors Nos. 1122 and 1123.

Autotorch System

Automatic push-button, piezo-electric ignition plus nine easy to change burners. Gone are the days of looking for matches; or the irritation of trying to light in windy conditions. To BS EN 731.

Burners

No 2101\t- Very fine needle flame burner for precision work. No 2102 - Fine flame burner for localised heating. No 2103 - Small flame burner for soldering small assemblies. No 2104 - Medium flame burner for heating, plumbing and engineering where a compact well defined flame is required. No 2105\t- General purpose heating and soldering burner with a large well defined flame. No 2106 - More powerful flame for general use. No 2110 - Autotorch fishtail burner. A superb tailor made burner to give quick and efficient paint stripping; also for plastic tile laying, heat shrinking of plastics. No 2120 - Autotorch hot air burner. Gives a very short flame which barely emerges from the end of the burner. This draws in a large amount of air which is heated by the flame. Ideal for paint stripping, and heat shrinking of plastics. No 2121 - Autotorch soft flame burner. Well spread flame for heat shrinking of plastics for cable jointing and other industrial plastics.

Blowtorch

Frequently used by professionals and Do-It-Yourself. For soft soldering, small brazing, paint stripping and other heating applications.
Work pressure: 1 bar
Gas consumption: 70 g/h
Effect: 900 W
Use only with Powergas cartridge 2204

P229501

Blowtorch

Frequently used by professionals and Do-It-Yourself. For soft soldering, small brazing, paint stripping and other heating applications.
Burner diameter: 17mm
Pressure: 3bar
Gas consumption: 180g/h
Effect: 2,3kW
Soft soldering max ? 28mm
Brazing max ? 12mm
Length: 250mm
Height (with cartridge): 170mm
Weight (without cartridge): 215g

P2294

Ultramapp Gas Canister

A blend of Propane, Butane, Acetone and Propene to achieve a flame temperature of more than 2100 degrees Celcius! Simply screw the canister into the threaded fitting inside the tool to install. Gas canisters to suit the Sievert 3380 Portable Soldering Iron.