Butane propane Gas Cartridges

Fitted with standard type threaded self-sealing valves. Conform with BS EN 417

Autotorch System

Automatic push-button, piezo-electric ignition plus nine easy to change burners. Gone are the days of looking for matches; or the irritation of trying to light in windy conditions. To BS EN 731.

Burners

No 2101\t- Very fine needle flame burner for precision work. No 2102 - Fine flame burner for localised heating. No 2103 - Small flame burner for soldering small assemblies. No 2104 - Medium flame burner for heating, plumbing and engineering where a compact well defined flame is required. No 2105\t- General purpose heating and soldering burner with a large well defined flame. No 2106 - More powerful flame for general use. No 2110 - Autotorch fishtail burner. A superb tailor made burner to give quick and efficient paint stripping; also for plastic tile laying, heat shrinking of plastics. No 2120 - Autotorch hot air burner. Gives a very short flame which barely emerges from the end of the burner. This draws in a large amount of air which is heated by the flame. Ideal for paint stripping, and heat shrinking of plastics. No 2121 - Autotorch soft flame burner. Well spread flame for heat shrinking of plastics for cable jointing and other industrial plastics.

Regulators

High performance high pressure regulators to BS.3016, operating over temperature range 20C to 50C. Tinyregs: No 1051, No. 1051/01 - High performance. Any can supply enough gas for any single Bullfinch product. Tinyregs pre-set: No. 1041, No. 1040 - Bijou: No 1465, No 1465X & No 1466 - High volume compact regulators for propane. Ideal for supplying two or more appliances and appliances with a high throughput.

High Pressure

Autotorch System

Automatic push-button, piezo-electric ignition plus nine easy to change burners. Gone are the days of looking for matches; or the irritation of trying to light in windy conditions. To BS EN 731.

Burners

No 2101\t- Very fine needle flame burner for precision work. No 2102 - Fine flame burner for localised heating. No 2103 - Small flame burner for soldering small assemblies. No 2104 - Medium flame burner for heating, plumbing and engineering where a compact well defined flame is required. No 2105\t- General purpose heating and soldering burner with a large well defined flame. No 2106 - More powerful flame for general use. No 2110 - Autotorch fishtail burner. A superb tailor made burner to give quick and efficient paint stripping; also for plastic tile laying, heat shrinking of plastics. No 2120 - Autotorch hot air burner. Gives a very short flame which barely emerges from the end of the burner. This draws in a large amount of air which is heated by the flame. Ideal for paint stripping, and heat shrinking of plastics. No 2121 - Autotorch soft flame burner. Well spread flame for heat shrinking of plastics for cable jointing and other industrial plastics.

Autotorch Brazing System

A portable bronze brazing system using only a single cylinder of propane. Automatic piezo-electric ignition plus interchangeable burners.

Burners

No 4103 giving the smallest, No 4105 the largest, flames. The burners must be used at 4 bar pressure and should not be turned down. If a smaller flame is required a smaller burner must be used.

Auto Ignition Torches

General purpose blow lamp for paint stripping & plumbing work. Lightweight and versatile with easy to hold handle for complete control, durable brass control tap and advanced burner system. Warms up quickly and can be used at any angle without flaring. With instant push button ignition. Complete with 2175 cartridge and stabilizing base.

AT2071 Auto Blowlamp

Standard Torch Kits

Torches assembled with hose, regulators and burners for immediate use. No 110P (Propane) - Contents: Handle No 1185, Burner No 1230, Tinyreg No 1041, 2.75m (9ft), HP hose No 1299, Two 'O' clips No 1324. No. 140P - (Propane)Contents: Handle No 1340, Burner No 1230, Tinyreg variable regulator No 1051, 2.75m (9ft), HP hose No 1299, Two 'O' clips No 1324. No 135 Extended Torch Kit (Propane) - Contents: Handle No 1345, Trident burner adaptor No 1123, Three Standard burners No 1260.

Blowtorch

Gives a precise and adjustable flame ideal for cooking, lighting barbeques and candles also small soldering jobs. Hi-tech polymer construction - lightweight yet sturdy with automatic ignition. Flame temperature 1300C, burning time per fill 60 min.

Micro Torch 430000

Disposable Butane Cartridge

Piercable cartridge without valve, contains 100% butane. 350ml (190gm)

P2210CA

Burners for Standard Torches

Robust, strong, reliable burners for a wide range of needs. No 1470 - Extremely fine flame - for jewellers and dental purposes. No 1472 - Well defined flame. No 1473 - Soft flame for heat shrinking. No 1210 - Small flame for narrow window sashes, central heating installations. No 1220 - Medium flame - for soldering and silver soldering. No 1230 - General purpose flame. No 1240 - More powerful general purpose flame. No 1248 - Standard fishtail burner, excellent flame structure over a wide range of pressures. For paint stripping and applications needing wide fantail flame. No 1250 - Suitable for metal melting. No 1260 - Powerful flame for general engineering purposes. No 1270 - Extremely powerful, for heavy soldering, forging, roofing, weed burning.