Anti-Fatigue & Safety Floor Matting

Resistant to many industrial chemicals. Yellow borders create a highly visible safety warning helping to prevent accidents. Diamond surface provides greater traction with extended wear and can be easily cleaned. Foam backed designed to relieve operator fatigue. Bevelled edges to prevent accidents and allows easy access for trolleys. Supplied on a roll. Thickness: 14mm. Colour: Black with yellow edges.
Please allow 5 - 7 days for delivery.

Safety Deckplate

High Duty Matting

Tiles made from high quality rubber with raised holes to allow drainage of liquids and debris offering a safe operating surface. Tiles can be interlocked to provide coverage of any desired length. Raised circular surface offers slip resistance in all directions. Size: 900 x 1500 x 12.5mm thick. Colour: Black only.
Please allow 5 - 7 working days for delivery.

Anti-Fatigue & Safety Floor Matting

Manufactured from extremely hardwearing rubber capable of operating in high temperature environments. Diamond surface provides greater traction with extended wear and can be easily cleaned. Interlocking tile system enables the user to produce any required length. Also offers insulation against cold floors. Size: 0.7 x 0.8m. Thickness: 12.5mm. Please allow 5 - 7 days for delievery.

Comfort Lok Matting

Gripfoot Anti-Slip Tape, Cleats & Tiles

Abrasive grit 'anti-slip' products with self-adhesive backing available in tapes, cleats and tiles. Provides additional grip underfoot on smooth surfaces. Hard wearing and easy to install.
Gripfoot Tape - versatile for floor surfaces, machinery, vehicles and marine use.
Gripfoot Tiles (square) are ideal for increasing safety on smooth, tiled floors.
Hazard version (tape only) in yellow/black provides high visibility in darkness or low light conditions.
Conforms to Slip Resistant Test EN 13552 Category R13.

COBAGRiP Sheet

COBAGRiP is a range of UV stabilised GRP sheets, treads and stair nosing designed to offer exceptional levels of slip resistance both indoors and out, while having outstanding wear and tear qualities. It is an ideal underfoot safety solution for pedestrian and factory walkways, access ramps, gangways and bridges. The silicone carbide ‘gritted’ top surface provides effective underfoot grip and is resistant to most solvents and chemicals. It is manufactured using flame retardant materials. Easy to install, simply bond or screw to the existing floor surface. COBAGRiP is a cost-effective means of refurbishing damaged or slippery floors. Easy to clean (pressure wash).



Ideal solutions for slip hazards such as spilt liquids or ice.
Available in 3 colours to meet all DDA requirements. Suitable for use with forklift traffic. Simply bond or screw to the existing floor surface.
Product height: 3mm GRP base overall 5mm.

COBAGRiP Sheet

COBAGRiP is a range of UV stabilised GRP sheets, treads and stair nosing designed to offer exceptional levels of slip resistance both indoors and out, while having outstanding wear and tear qualities. It is an ideal underfoot safety solution for pedestrian and factory walkways, access ramps, gangways and bridges. The silicone carbide ‘gritted’ top surface provides effective underfoot grip and is resistant to most solvents and chemicals. It is manufactured using flame retardant materials. Easy to install, simply bond or screw to the existing floor surface. COBAGRiP is a cost-effective means of refurbishing damaged or slippery floors. Easy to clean (pressure wash).



Ideal solutions for slip hazards such as spilt liquids or ice.
Available in 3 colours to meet all DDA requirements. Suitable for use with forklift traffic. Simply bond or screw to the existing floor surface.
Product height: 3mm GRP base overall 5mm.

Commercial Black Sheets

General-purpose grade for water service and dilute chemicals. Low cost waterproof seals, gaskets. 68 shore A hardness. Tensile strength at break: 3.0Mpa. Elongation at break: 200%.

M228 EPDM Rubber Sheets

EPDM RUBBER is ideal for outdoor application because of its excellent resistance to ozone, oxidants and severe weather conditions. 67 shore A hardness. Tensile strength at break: 5Mpa. Elongation at break: 300%

Cobamat Roll - Standard

Hole size: 22 x 22mm, thickness 12mm. Flame retardant to DIN 4102. Resistant to mild acids and alkalis. Conforms to slip resistance test DIN 51097 Category B. Cross ribbed in both directions for added grip. Relieves operator fatigue. Gives a safe operating surface as debris falls through the matting. Reversible. Optional extras: bevelled safety edging (factory fitted) and fixing blocks.
Please allow 5 - 7 working days for delivery.

Insertion Rubber

Similar properties to standard commercial but embedded textile reinforcement offers increased tensile strength and tear resistance. 68 shore A hardness.
Tensile strength at break: 2.5 Mpa. Elongation at break: 200%