Shotblast Rubber Sheets

A cost-effective, abrasion-resistant rubber. 62 shore A hardness. Tensile strength at break: 10Mpa. Elongation at break: 350%

Gripfoot Anti-Slip Tape, Cleats & Tiles

Abrasive grit 'anti-slip' products with self-adhesive backing available in tapes, cleats and tiles. Provides additional grip underfoot on smooth surfaces. Hard wearing and easy to install.
Gripfoot Tape - versatile for floor surfaces, machinery, vehicles and marine use.
Gripfoot Tiles (square) are ideal for increasing safety on smooth, tiled floors.
Hazard version (tape only) in yellow/black provides high visibility in darkness or low light conditions.
Conforms to Slip Resistant Test EN 13552 Category R13.

Cobamat Roll - Standard

Hole size: 22 x 22mm, thickness 12mm. Flame retardant to DIN 4102. Resistant to mild acids and alkalis. Conforms to slip resistance test DIN 51097 Category B. Cross ribbed in both directions for added grip. Relieves operator fatigue. Gives a safe operating surface as debris falls through the matting. Reversible. Optional extras: bevelled safety edging (factory fitted) and fixing blocks.
Please allow 5 - 7 working days for delivery.

Cobamat Roll - Heavy

Hole size: 22 x 10mm, thickness 12mm. Close pitch hole allows the use of trucks and trolleys. Meets the DIN 4102 specification for flame retardancy. Conforms to slip resistance test EN13552 Category R10. Resists most industrial oils and chemicals. Ideal for high traffic flow areas, along main production lines and walkways. Gives a safe operating surface as debris falls through the matting. Optional extras: Bevelled safety edging (factory fitted).
Please allow 5 - 7 working day delivery.

Anti Fatigue & Safety Floor Matting

Heavy duty ribbed carpet surface provides 'channels to capture dirt and debris. Traps moisture from shoes making smooth floors safer for pedestrians. Protects carpets and floors from foot traffic damage. 100% solution dyed Polypropylene fibre carpet surface. Non-staining Vinyl backing. Thickness: 9mm. Colour: Grey, red, brown, green, blue, charcoal.
Please allow 5 - 7 days for delivery.

Toughrib

Solid Fatigue Step Matting

Extremely robust interlocking tiles for heavy-duty use.
Made from Nitrile for excellent resistance to oils and chemicals. Carbide bonded ‘grit’ top surface provides exceptional grip even in oily conditions. Provides high levels of comfort underfoot to relieve fatigue. Open holes for efficient drainage of spilt liquids.
Optional black or yellow bevelled edging.
Colour: Black.
Height: 19mm.

Gripfoot Anti-Slip Tape, Cleats & Tiles

Abrasive grit 'anti-slip' products with self-adhesive backing available in tapes, cleats and tiles. Provides additional grip underfoot on smooth surfaces. Hard wearing and easy to install.
Gripfoot Tape - versatile for floor surfaces, machinery, vehicles and marine use.
Gripfoot Tiles (square) are ideal for increasing safety on smooth, tiled floors.
Hazard version (tape only) in yellow/black provides high visibility in darkness or low light conditions.
Conforms to Slip Resistant Test EN 13552 Category R13.

Entrance Matting

An economical solution to contamination control. Manufactured from an anti-microbial agent to protect against the growth of organisms such as bacteria, mould and mildew. Adhesive coated surface captures dirt and dust particles. Traps dirt from wheels and pedestrian foot traffic. Disposable layers - peel off soiled sheets to reveal a clean layer. Adhesive backed pads stick directly to floor surface. Approved for direct food contact.
Size: 0.45 x 1.17m.

First Step

Bubble Mat

Manufactured from a hard wearing rubber compound. Bubble surface consistently stimulates blood circulation to reduce fatigue. Insulates against cold concrete floor. Ideal for use where an operator is standing in a static position for long periods. Available in two standard sizes complete with bevel edges and in the middle and end pieces for longer runs.
Please allow 5 - 7 days for delivery.

COBAGRiP Stair Nosing

COBAGRiP is a range of UV stabilised GRP sheets, treads and stair nosing designed to offer exceptional levels of slip resistance both indoors and out, while having outstanding wear and tear qualities. It is an ideal underfoot safety solution for pedestrian and factory walkways, access ramps, gangways and bridges. The silicone carbide ‘gritted’ top surface provides effective underfoot grip and is resistant to most solvents and chemicals. It is manufactured using flame retardant materials. Easy to install, simply bond or screw to the existing floor surface. COBAGRiP is a cost-effective means of refurbishing damaged or slippery floors. Easy to clean (pressure wash).



Designed to help prevent slips on stairs.
Suitable for use on existing or new build steps.
Manufactured with a chamfered back edge for additional safety.
Bright colour for visibility meeting DDA requirements.
Product Height: 3mm GRP base overall 5mm.