Safety goggles

Medium energy impact protection at extreme environmental temperatures. Anti-scratch coating for a longer lens life. UV protection. Replaceable, clear and flexible 2mm thick polycarbonate lens. Anti-mist treatment on both sides of the lens. Class 1 optical quality for distortion free continuous use. Resistance to molten metals and hot solids. Built-in brow and cheek protection. Foam surround for improved comfort and adherence. Soft anatomically shaped PVC frame adapts to all faces. Indirect ventilation system. Raised nose bridge for extra lens protection when placed face down. Large peripheral viewing area. Wide anallergenic elasticated headband. Replacement clear polycarbonate lens KEN-960- 8100K. Replacement clear acetate lens KEN-960- 8110K.

Tiger

Kennedy Welding Helmets

The Kennedy Jet Black Auto-X? welding helmet automatically protects the operator from eye injuries, caused by weld arc and also leave both hands free when welding. The helmet is equipped with two photo sensors that sense arc light, these automatically switch the filter from shade 4 (transparent prior to welding to enable the operator to observe the work piece clearly) as soon as the Arc is struck the filter darkens automatically with immediate effect to the to pre-selected shade 8, 9, 10, 11, 12, or 13. When the arc goes out, the filter will become transparent again.

The switching time from light to dark is approximately 0.0001 seconds, and the switching time from dark to light can be set at between 0.1 - 0.6 second.

The Kennedy Jet Black Auto-X? mask provides complete protection against UV/IR to DIN15 even in transparent mode and is dual powered by 2 lithium batteries and a solar panel with two sets of photo sensors to sense arc light. The outer shell of the helmet is manufactured from a high polymer thermostable material that is spatter resistant to ensure a long service life.

Jet Black Auto-X? Automatic Welding Helmet

Kennedy Jet Black Auto-X? helmet specification:

Filter dimensions: 110 x 90 x 7mm
View area: 98 x 42mm
Light shade number: 4
Dark shade number: 8 to 13
UV/IR protection: DIN 16
Time from light to dark: 0.0001s
Time from dark to light: 0.1 - 0.6s
Dual power supply solar panel and battery: 2 x 3V CR2032 lithium batteries provide power for approximately 800 hours working.
Operating temperature: -5C - 55C (23F - 131F)
Storing temperature: -20C - 65C (-4F - 149F)
Weight: 480g

For the full range of gas, Tig, Mig & Arc welders, consumables and protective clothing please refer to our catalogue.

Replacement Goggle Lens

Polycarbonate replacement lens for Kennedy Scorpion Goggles (KEN-960-8070K).

Kennedy Welding Helmet

The Kennedy Automatic Variable Shade Welding Helmet automatically protects the operator from eye injuries caused by weld arc, leaving both hands free. The helmet is equipped with two sets of photo sensors to sense arc light, these switch the filter from shade 4 to the to pre-selected shade 9, 10, 11, 12, or 13 in just 0.5ms. As the helmet is powered by an integral solar panel no bulky batteries are required which reduces the weight and size of the helmet and ensures that the helmet always has power when you need it. The filter provides permanent UV/IR protection up to DIN 15 whilst in use. Any of the five welding shades can be easily selected using the side mounted adjustment dial. The Kennedy welding helmet shell is certified to DIN EN 169 and DIN 179 and is suitable for Arc & Mig/Mag welding only.

(Spare cover lenses to protect the liquid crystal cartridge unit are available to order, inner CTL8857983K, outer CTL8857983E. Supplied in packs of 10)

HAS413 Automatic Variable Shade Welding Helmet

Neoprene Gel Knee Pads

Quick release velcro fastening.
One size fits all.
Flexible straps prevent binding behind the knee.
Non-marring face protects surfaces.
Gel filled pad absorbs impact.
'Open' back provides ventilation.

Chrome Leather Welder's Clothing

A range of economically priced, rugged workwear manufactured from high quality selected chrome leather. Spatter resistant and tear resistant. The full range offers head to toe protection against weld spatter and grinding sparks. Suitable for use in workshops, foundries and on-site.

Aprons

Generous fit for full torso and upper leg protection against weld spatter and grinding sparks, whilst offering freedom of movement for the wearer. All seams have heavy duty stitching for durability and extended wear.
Available in a choice of tie or buckle fastening.
Meets all the requirements of BS EN ISO 11611:2007.
Colours: available in a choice of grey or red.

Chrome Leather Welder's Clothing

A range of economically priced, rugged workwear manufactured from high quality selected chrome leather. Spatter resistant and tear resistant. The full range offers head to toe protection against weld spatter and grinding sparks. Suitable for use in workshops, foundries and on-site.

Aprons

Generous fit for full torso and upper leg protection against weld spatter and grinding sparks, whilst offering freedom of movement for the wearer. All seams have heavy duty stitching for durability and extended wear.
Available in a choice of tie or buckle fastening.
Meets all the requirements of BS EN ISO 11611:2007.
Colours: available in a choice of grey or red.

Baseball Caps

Suitable for casual wear, sports and also protects from dirt, paints, oil etc.

Caps - Breathable

6 panel caps with cloth headbands. One size fits all. Waterproof plastic peak insert. With 4 breathable mesh rear panels.

Baseball Caps

Suitable for casual wear, sports and also protects from dirt, paints, oil etc.

Cotton Fleece Caps

6 panel caps with ventilation holes. One size fits all. Waterproof plastic peak insert.

Reversible Welders' Gauntlet

Reversible (ambidextrous) lined, green welders' gauntlet, type A. Size: 10. CE approved to EN12477, EN388, EN407.