Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DM664 Digital Multimeter

DM664 Digital Multimeter specification: Extra large digits, temperature probe and short lead capacitor, removable rubber holster with lead holders. Continuity, diode, transistor hFE, auto power off, overload indication, low battery indicator, tilt stand/hanger.

Voltage (max): 700V AC 1000V DC.
Current (max): 10A AC/DC.
Resistance (max): 200MW.
Capacitance (max): 200mF.
Frequency (max): 20kHz.
Temperature (max): -20 to 1000C.
Safety Rating: Cat III 600V. Cat II 1000V.
1 year warranty.
Supplied with holster.

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DAM060 Auto Range Digital Multimeter with USB Interface

Ideal for electrical troubleshooting & straightforward maintenance, initial start-up testing & R&D in industry.

The digital multimeter with its USB interface for the
PC is capable of testing the following;
- Electrical testing.
- Temperature testing (K Type) from -5°C to 1000°C.

AC voltage up to 700V.
DC voltage up to 1000V.
AC/DC current up to 10A.
Resistance up to 60MW.
Capacitance up to 300mF.
Frequency/Duty cycle from 1Hz to 1MHz.
Diode testing & buzzer.
Relative measurement function.
Clear display with LED back light & data hold function.
Auto power off & low power indicator.
Auto/manual range.
Electronic protection system.
Digital display count up to 6000.
Conforms to IEC 1010, CAT II 1000V & CAT III 600V.

Pack includes:
- Digital Multimeter
- Test probes
- Temperature sensor
- Clamp-on test lead
- USB Interface
- CD ROM 'PC-LINK' software (Compatible with Windows 2000, NT or XP)
- 9V battery (installed)
- Instruction manual

PC-LINK software features:
- Measure graph
- Measure data record
- Simulate LCD display
- Analogue dial plate display
- Measure Max/Min display
- Sampling interval
- Graph export
- Measure data save

Dimensions: 165(W) x 65(D) x 230(H) mm
182g Gross Weight

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DCM998A Digital Multimeter

DCM998A Digital Multimeter specification:
Large digits, max alert, fitted ABS case. Continuity, reading/peak hold, back light, overload indication, low battery indicator.

Voltage max:750V AC, 1000V DC.
Current max: 1000A AC.
Resistance max: 2000MW.
Jaw opening max: 55mm.
Safety rating: Cat II.
Warranty: 1 year.
Supplied with case.

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DAM982 Autoranging Digital Multimeter

Ideal for electrical and electronic engineers. Automatic range and over range indication. Ten position rotary switch. Large, 25mm digital display with backlight. Measures DC voltage, AC voltage, resistance, capacitance, frequency, other functions include auto and manual range modes, relative measurement, data hold, diode test, continuity test and duty cycle test function Supplied with 9V battery protective cover and stand, test probes operators' manual and deluxe fitted nylon case. Complies with IEC1010 for measurement on 600V Cat III installations.

Display: 3999 COUNTS. 25mm High digital display.
DC Voltage: 400m/4/40/400V/-0.7%, 1000V/-0.8%
AC Voltage: 4/40/400V/-0.8%, 750V/-1.0% (40Hz to 400Hz)
DC Current: 4000 mu /400ma/-1.2%, 10A/-2.0%
AC Current: 4000 mu /400ma/-1.5%, 10A/-3.0% (50Hz to 400Hz)
Resistance: 400/4K/40K/400K/4M?/-1.2%, 40M?/-2.0%
Capacitance: 4nf/-5.0%, 40n/400n/4 mu /40 mu /200 mu F/-3.0%
Frequency:10/100/1000/10K/100K/1000K/10mhz/-2.0%
Duty cycle: 0.1%99.9%/-2.0%
Diode test autorange and manual range relative measurement data hold back light Power: 6F22(9V) x 1 Size: 185 x 84 x 38mm
Weight: 285g (including battery)

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

OJM826 Open Jaw Digital Multimeter

Ideal for electrical and electronic engineers. Automatic range and over range indication. Ten position rotary switch. Large, 25mm digital display with backlight. Measures current DC voltage, AC voltage, resistance, capacitance, frequency, other features include, relative measurement, data hold, diode test, continuity test and duty cycle test function. Supplied with 9V battery protective cover and stand, test probes operators' manual and deluxe fitted nylon case. Complies with IEC1010 for measurement up to 600V Cat III installations (and 1000V Cat II)

DISPLAY: 3999 Counts.
DCV: 4/40/400V /- 0.7% 1000V /- 0.8%ACV: 4/40/400V /- 0.8% 700V /- 1.0%ACA: 200A /- 3.0% (50Hz to 1000Hz)Ohm: 400/4k/40k/4M Ohm/- 1.2% 40M Ohm/-2.0%CAP: 40n/400n/4 mu /40 mu F /- 4.0%
FREQUENCY: 10Hz to 100Khz /- 2.0%DUTY CYCLE: 0.1% to 99.9%
BACKLIGHT AUTO OFF TIME LIMIT MODE

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DAM100 Auto Range Hi-Accuracy Digital Multimeter with USB Interface

Ideal for electrical troubleshooting & straightforward maintenance, initial start-up testing & R&D in industry. Also suitable for use by government authority's, test lab & manufacturing.

The high accuracy digital multimeter with its USB interface
is capable of testing the following;
- Linear frequency from 5Hz to 200KHz.
- Logic frequency from 5Hz to 2MHz.
- Duty cycle from 5% to 95%.
- Diode testing from 0 to 2.5V.

AC/DC voltage up to 1000V.
AC/DC current up to 10A.
Resistance up to 50MW.
Capacitance up to 5000mF.
Relative measurement function.
Clear display with LED back light & data hold function.
Auto power off & low power indicator.
Digital display count up to 50000.
Conforms to IEC 10101, CAT II 1000V and CAT III 600V.

Pack includes:
- Digital Multimeter
- Test probes
- Clamp-on trat leads
- USB Interface conection
- CD ROM 'PC-LINK' software (Compatible with Windows 98ME, 2000, NT or XP)
- 6x 1.5V AAA batteries (installed)
- Instruction manual
- Protective case with carry strap

PC-LINK software features:
- Measure graph
- Measure data record
- Simulate LCD display
- Analogue dial plate display
- Measure Max/Min display
- Sampling interval
- Graph export
- Measure data save

Product Dimension: (W)178 x (D)65 x (H)255 mm
1018g Gross Weight

Edison™ Multimeters

Suitable for the Edison™ DAM664 Order code EDI-516-3000K and DAM668 Order code EDI-516-2700K.

Replacement Multimeter Probes

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

MNT070 3-in-1 Digital Multimeter and Network Maintenance Tester

The 3 in 1 digital multimeter is capable of testing the
following;
- Network cable testing.
- Line testing (RJ11).
- DMM testing.

AC/DC voltage up to 1000V.
AC/DC current up to 10A.
Resistance up to 200MW.
Relative measurement function.
Diode testing facility.
Clear display with LED back light & data hold function.
Conforms to IEC 1010, CAT II 1000V and CAT III 600V.

Pack includes:
- Network digital multimeter
- Test probes
- TJ45 jack (remote)
- 9V battery (installed)
- Instruction manual

Product Dimensions: 165(W) x 65(D) x 230(H) mm
618g Gross Weight

Edison™ Multimeters

For Edison™ OJM826 Open Jaw Digital Multimeter illustrated (EDI-516-3500K).
N.B. Probe only. Case and Multimeter not included.

Replacement Multimeter Probes

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DAM075 Auto Range Digital Multimeter

Ideal for electrical troubleshooting and temperature testing in residential & commercial environments.

The 2-in-1 digital multimeter is capable for the following tasks:
- Electrical testing using test probes, no contact voltage detection & testing for wiring faults.
- Testing temperature from -20°C to 1000°C.

AC voltage up to 750V.
DC voltage up to 1000V.
AC/DC current up to 10A.
Resistance up to 40MW.
Capacitance up to 200mF.
Relative measurement function.
Diode testing facility.
Clear display with LED back light & data hold function.
Auto power OFF? & low power indicator.
Digital display count up to 3999.
Conforms with IEC 1010, CAT II 1000V & CAT III 600V.

Pack includes:
- Digital multimeter
- Test probes
- Temperature sensor probe
- DC1.5V x3 AAA batteries (installed)
- Instruction manual

Product dimensions: 152(W) x 45(D) x 190(H) mm
416g Gross Weight