Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DAM075 Auto Range Digital Multimeter

Ideal for electrical troubleshooting and temperature testing in residential & commercial environments.

The 2-in-1 digital multimeter is capable for the following tasks:
- Electrical testing using test probes, no contact voltage detection & testing for wiring faults.
- Testing temperature from -20°C to 1000°C.

AC voltage up to 750V.
DC voltage up to 1000V.
AC/DC current up to 10A.
Resistance up to 40MW.
Capacitance up to 200mF.
Relative measurement function.
Diode testing facility.
Clear display with LED back light & data hold function.
Auto power OFF? & low power indicator.
Digital display count up to 3999.
Conforms with IEC 1010, CAT II 1000V & CAT III 600V.

Pack includes:
- Digital multimeter
- Test probes
- Temperature sensor probe
- DC1.5V x3 AAA batteries (installed)
- Instruction manual

Product dimensions: 152(W) x 45(D) x 190(H) mm
416g Gross Weight

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DCM998A Digital Multimeter

DCM998A Digital Multimeter specification:
Large digits, max alert, fitted ABS case. Continuity, reading/peak hold, back light, overload indication, low battery indicator.

Voltage max:750V AC, 1000V DC.
Current max: 1000A AC.
Resistance max: 2000MW.
Jaw opening max: 55mm.
Safety rating: Cat II.
Warranty: 1 year.
Supplied with case.

Digital Temperature, Humidity and Dew Point Multimeter

This multimeter is ideal for temperature, humidity and dew point testing in residential and commercial environments such as offices, storeroom's, greenhouses and places where a
controlled environment is essential. Conforms with EN61326-6: 2006 and EN61326-2-2: 2006.

Meter capabilities:
Testing temperature: -10 ~ 50°C (14 to 122°F).
Testing humidity: 0 ~ 100%RH.
4 digit clear LCD display with optional back light.
Data hold function.
Auto power off & low power indicator.
Battery operated - DC1.5V 3x AAA (included).

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DM383 Digital Multimeter

The DM383 Digital Multimeter from Edison™ is a compact unit that has a removable rubber protective holder, that protects it against the bumps and knocks encountered on site.

Features include:
Continuity testing.
Transistor hFE.
Reading/peak hold.
Fused current range.
Auto power off.
Overload indication.
Low battery indication.
Tilt stand/hanger.

DM383 specification
Voltage max: 600V AC/600V DC.
Current max: 10A DC.
Resistance max: 2M Ohms.
Safety rating: Cat II.
Supplied complete with: 9V battery.
1 year warranty.
Supplied with holster.

For the full range of Edison™ multimeters please refer to the catalogue PDF or enter the search EDI-516.

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

OJM826 Open Jaw Digital Multimeter

Ideal for electrical and electronic engineers. Automatic range and over range indication. Ten position rotary switch. Large, 25mm digital display with backlight. Measures current DC voltage, AC voltage, resistance, capacitance, frequency, other features include, relative measurement, data hold, diode test, continuity test and duty cycle test function. Supplied with 9V battery protective cover and stand, test probes operators' manual and deluxe fitted nylon case. Complies with IEC1010 for measurement up to 600V Cat III installations (and 1000V Cat II)

DISPLAY: 3999 Counts.
DCV: 4/40/400V /- 0.7% 1000V /- 0.8%ACV: 4/40/400V /- 0.8% 700V /- 1.0%ACA: 200A /- 3.0% (50Hz to 1000Hz)Ohm: 400/4k/40k/4M Ohm/- 1.2% 40M Ohm/-2.0%CAP: 40n/400n/4 mu /40 mu F /- 4.0%
FREQUENCY: 10Hz to 100Khz /- 2.0%DUTY CYCLE: 0.1% to 99.9%
BACKLIGHT AUTO OFF TIME LIMIT MODE

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DM664 Digital Multimeter

DM664 Digital Multimeter specification: Extra large digits, temperature probe and short lead capacitor, removable rubber holster with lead holders. Continuity, diode, transistor hFE, auto power off, overload indication, low battery indicator, tilt stand/hanger.

Voltage (max): 700V AC 1000V DC.
Current (max): 10A AC/DC.
Resistance (max): 200MW.
Capacitance (max): 200mF.
Frequency (max): 20kHz.
Temperature (max): -20 to 1000C.
Safety Rating: Cat III 600V. Cat II 1000V.
1 year warranty.
Supplied with holster.

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DCM007 Auto Range True RMS 1000A AC/DC Digital Clamp Meters

Ideal for electrical troubleshooting & testing in commercial environments.
The AC/DC digital multimeter is capable of testing for the following;
- Telephone networks.
- Fuse connections.

AC voltage up to 750V.
DC voltage up to 1000V.
AC/DC current up to 1000A.
Resistance up to 60MW.
Frequency up to 100kHz.
Frequency from clamp up to 400Hz.
Diode testing facility.
Continuity Buzzer.
Clear display with LED backlight & data hold function.
Auto power off & low power indicator.
Auto range facility.
4 segments bar graph
Digital display count up to 3999.
Conforms to IEC 1010, CAT II 1000V and CAT III 600V.

Pack includes:
- Digital Clamp Multimeter
- Test probes
- 3x DC1.5V AAA batteries (installed)
- Instruction manual
- Protective case with carry handle

Product Dimensions: 140(W) x 58(D) x 260(H) mm
606g Gross Weight

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DAM982 Autoranging Digital Multimeter

Ideal for electrical and electronic engineers. Automatic range and over range indication. Ten position rotary switch. Large, 25mm digital display with backlight. Measures DC voltage, AC voltage, resistance, capacitance, frequency, other functions include auto and manual range modes, relative measurement, data hold, diode test, continuity test and duty cycle test function Supplied with 9V battery protective cover and stand, test probes operators' manual and deluxe fitted nylon case. Complies with IEC1010 for measurement on 600V Cat III installations.

Display: 3999 COUNTS. 25mm High digital display.
DC Voltage: 400m/4/40/400V/-0.7%, 1000V/-0.8%
AC Voltage: 4/40/400V/-0.8%, 750V/-1.0% (40Hz to 400Hz)
DC Current: 4000 mu /400ma/-1.2%, 10A/-2.0%
AC Current: 4000 mu /400ma/-1.5%, 10A/-3.0% (50Hz to 400Hz)
Resistance: 400/4K/40K/400K/4M?/-1.2%, 40M?/-2.0%
Capacitance: 4nf/-5.0%, 40n/400n/4 mu /40 mu /200 mu F/-3.0%
Frequency:10/100/1000/10K/100K/1000K/10mhz/-2.0%
Duty cycle: 0.1%99.9%/-2.0%
Diode test autorange and manual range relative measurement data hold back light Power: 6F22(9V) x 1 Size: 185 x 84 x 38mm
Weight: 285g (including battery)

Edison™ Multimeters

Edison™ multimeters are an essential and versatile piece of test equipment. They are used by qualified electricians and mechanics alike to perform various essential tests and measurements on delicate electronic systems, automotive devices, mains appliances, and installations. By operating the multi position switch they can quickly and easily set to be a voltmeter, an ammeter or an ohmmeter. Within the Edison™ range of multimeters you will find direct reading multimeters and non-contact reading multimeters.

DAM332 Pocket Digital Multimeter

Pocket sized with integral lead storage. Features include continuity, diode, reading/peak hold, fused current range, auto power off, overload indication, low battery indication.

Voltage max: 600V AC 600V DC.
Current max: 400mA AC/DC.
Resistance max: 40MW.
Safety rating: Cat II.
1 year warranty.
Supplied with wallet.