Kennedy Rules and Measures

The Kennedy combination square is a multi-functional tool that can be used as a try square, mitre square, depth gauge, spirit level, marking gauge, height gauge and rule. Supplied with scribing tool. Diecast aluminium alloy head with the precision rolled rule.

Available in two sizes:
150mm (6") Order Code: KEN-597-7060K
300mm (12") Order Code: KEN-597-7120K

300mm (12") Combination Square

Scraper Set

For fine surface finishing of intricate contour surfaces. This set of three cabinet scrapers offer shaped edges to match any profile. The rectangular one is used on flat surfaces and the concave/convex and goose neck scrapers will suit all types of curved mouldings. Used to manually remove small amounts of material and excels in tricky grain areas where hand planes would cause tear out. Cabinet scrapers are most suitable for working with hardwoods, and can be used instead of sandpaper. Scraping produces a cleaner surface than sanding; it does not clog the pores of the wood with dust, and does not leave a fuzz of torn fibers, as even the finest abrasives will do. Made from Hardened and ground high carbon steel, these scrapers are 0.9mm thick and will stand up to any heavy duty scraping task with minimum tear out. For best results, these scrapers should be burnished to a razor sharp edge.
Shapes:
Goose neck, concave/convex & rectangle.

Flat Bit Set

Forged from high quality tool steel with chip clearance groove and hollow ground point. Centerless ground and true running. Ground spade bit head. For cutting holes in laminates and wood. 6mm hexagon shank to prevent slipping at speed.

No.4 Bailey Bench Planes

The base of the planes are manufactured from cast fine grey iron, all the contact surfaces are precision ground and polished to produce a stable platform for the blade. The unmachined parts are coated with a durable, high quality epoxy coating for long lasting protection against corrosion. The blade is manufactured from high carbon steel polished and precision ground, for a sharp long lasting edge. The blades are fully adjustable for depth of cut, alignment to the work surface and mouth size. The Frog with brass adjusting nut provides precise adjustment of the blade. The handles are virtually unbreakable and contoured to fit comfortably into the hand for improved control and reduced fatigue when in use.

Jack Plane

For rapidly removing stock, to prepare the rough timber before construction. 355mm base x 50mm blade width.

Bevel Edge Wood Chisels

Designed to give a life time of high performance. Chrome vanadium alloy blades, hardened, tempered, ground and polished. 'C.A.B.' (cellulose acetate butyrate handles).

Craftsman

Hammer-blow resistant handles. For craftsmen and joiners.

Fretsaw Blade

To suit fretsaws

Replacement Smoothing Plane Irons

Suitable for bench planes.

Replacement Block Plane Irons

All Stanley replacement plane irons are made from chrome carbon steel which has excellent edge retention characteristics and allows a razor sharp edge to be honed. All cutters are fine rotary ground to give a flat surface that is easier to sharpen.

Bull Nose Plane

Manufactured from fine grey cast iron. All working surfaces are accurately ground and polished. Allows rebates to trim right to the edge. Lightweight, ideal or trimming rebates. Blade cutter width: 29mm.

Sliding Bevels

Sliding bevels are used for marking angle lengths; 250 & 300mm. All measuring tools are made from aluminium block and with a steel blade. The scales are etched on the surface which ensures long durability. Edge holder for accurate positioning.