Stanley Block Planes

Suitable for end grain work or any application where single handed operation is required. The plane bodies are manufactured from fine grey iron ground and polished to a high quality finish. The unmachined areas are coated in a durable high gloss epoxy coating. The cutter is set at a low angle this ensures vibration is kept to a minimum producing good results when used on plastic laminates and other man made materials. All have adjustable cutter alignment and depth of cut.

4 1/2" Block Plane

Small professional plane made from close grained fine grey iron. Fully adjustable for depth of cut, cutter alignment and mouth opening. For end grain and general purpose fine finishing work. Comes with pouch for convenient storage. 40mm blade width.

Cabinet Makers Planes

Shoulder and bull nose rebate planes manufactured from fine grey iron precision ground and polished for flatness and squareness. Fine adjustment for precise control of mouth size for fine or coarse work. The front of the plane can be removed to allow the planes to be used as a chisel plane for working into stopped rebates.

Stanley Woodworking Tools

Stanley Mitre saw block the easy to use solution for precise mitre cuts.
Patented storage system for storing saw.
90 and 45 mitre slots as well as 22.5 for octagonal shapes.
Manufactured from lightweight high impact ABS plastic.

Length: 300mm.

Mitre Saw Block

Rabone Longlife Folding Rules

Traditional carpenter's extendable design allows convenient storage of a long straight measuring/marking out edge. Manufactured from tough engineering plastic with tipped ends. Colour: white.35 - 444: graduated mm, figured cm on both sides.35 - 445: graduated mm, figured cm one side, graduated 1/2", figured 1" other side.

Hand Drills

All supplied with 8mm, 3 jaw chucks. Handles are moulded from the same tough polypropylene as used for chisel handles.

Light Duty

Precision die cast aluminium gear wheel and single pinion to keep weight to a minimum.

No. 151 Spokeshaves

Manufactured from grey iron casting finished with a hard wearing durable epoxy lacquer coating. With fully adjustable cutter alignment and depth of cut. Suitable for rapid stock removal.

No.4 Bailey Bench Planes

The base of the planes are manufactured from cast fine grey iron, all the contact surfaces are precision ground and polished to produce a stable platform for the blade. The unmachined parts are coated with a durable, high quality epoxy coating for long lasting protection against corrosion. The blade is manufactured from high carbon steel polished and precision ground, for a sharp long lasting edge. The blades are fully adjustable for depth of cut, alignment to the work surface and mouth size. The Frog with brass adjusting nut provides precise adjustment of the blade. The handles are virtually unbreakable and contoured to fit comfortably into the hand for improved control and reduced fatigue when in use.

Jack Plane

For rapidly removing stock, to prepare the rough timber before construction. 355mm base x 50mm blade width.

Replacement Smoothing Plane Irons

Suitable for bench planes.

Replacement Block Plane Irons

All Stanley replacement plane irons are made from chrome carbon steel which has excellent edge retention characteristics and allows a razor sharp edge to be honed. All cutters are fine rotary ground to give a flat surface that is easier to sharpen.

Bull Nose Plane

Manufactured from fine grey cast iron. All working surfaces are accurately ground and polished. Allows rebates to trim right to the edge. Lightweight, ideal or trimming rebates. Blade cutter width: 29mm.