Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Tube suitability: Nylon, polyurethane.

Uni-directional Flow Regulators

Pressure Range: 1 to 10 bar. Temperature Range: 0°C to +80°C.

Camozzi Female/Female Reducers

2553
Series 2000 pipe fittings BSP adaptor female reducer.
Available in threads:
G1/8 - G1/4 overall length 17mm.
G1/8 - G3/8 overall length 18mm.
G1/4 - G3/8 overall length 19.5mm.
G1/4 - G1/2 overall length 23mm.
G3/8 - G1/2 overall length 24mm.

Camozzi Swivel Y-Connectors

7562
Super-rapid compact fitting Technopolymer fitting swivel Y-connector.
Available in:
4mm, G1/8 thread.
6mm, G1/8 thread.
6mm, G1/4 thread.
8mm, G1/8 thread.
8mm, G1/4 thread.
10mm, G1/4 thread.
10mm, G3/8 thread.

PCL Genuine "Schrader" Airline Coupling Adaptors

Case hardened, zinc finish. For use with 'Schrader' type couplings.

Male Threaded

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Type 3 Flat Head Silencer Sintered

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Elbow Connector to Male Parallel

Copper Compression Fittings

Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark, Prestex ?type A? compression fittings are suitable for mechanically joining copper or stainless steel tube by means of compressing a cone into a tube without the application of heat. The range is designed for use with copper tube to BS EN 1057: 1996 (formerly BS2871: part1 ), BS2871: part 2, or stainless steel tube to BS4127: 1994). Fittings are available in brass, all with brass cap nuts as standard.

Brass Cones/Olives

Supplied in packs of 50.

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Tube suitability: Nylon, polyurethane.

Quick Exhaust Valve Female to Female

Pressure Range: 0.3 to 10 bar. Temperature Range: -18°C to +70°C.

Bosch Rexroth Pneumatic Fittings

Rexroth QR1 Series push in pneumatic fittings type are available for inch tubing/NPT threads and metric tubing/ISO-G (BSPP) threads. The user friendly oval release ring allow the push-in fittings to quickly release from the tubing much more easily than traditional round release rings. QR1 fittings come in standard and mini sizes, plus function fittings such as ball valves, check valves, flow control etc. They feature premium materials such as the stainless steel tube locking mechanism and polymer body and release ring.

QR1 Series Blanking Screw Pneumatic Fitting

Blanking screw with O-ring M7-G1/2 FPT-S-RBI pneumatic fitting.
Working pressure 0 bar/16 bar at -20C/ +80C.
Materials:
Screw: Brass
Housing: Brass, nickel plated
Seal: Acrylonitrile Butadiene Rubber
Thread: Brass, nickel plated

For further specification on this product please see the attached PDF under the additional information tab.

Rexroth Y-Plug Connectors

Y-plug connector with a push-in fitting.
Ambient temperature min/max: +0°C/+60°C.
Working pressure min/max: -0.95 bar/10 bar.
Materials:
Housing: polybutyleneterephthalate.
Seal: acrylonitrile butadiene rubber.
Tooth lock washer: stainless steel.
Release ring: polyoxymethylene.
Release ring holder: die cast zinc; brass, nickel-plated.

QR1 Series