产品 / 轴承 & 滚轴
编号：RGM6905230M
●产品描述：
Table Top Slat Chain
A complete range of table top chains and sprockets in steel, stainless steel and molded thermoplastics. These are manufactured specifically for a conveying applications.
Some table top chains have been standardised between manufacturers. We show below the most popular ranges but with many specialty attachments and options available on table top chain, please contact your local service centre to assist in identifying and recommending the right table top chain for your application.
981M Series - Side Flexing Chain, Magnetic
Reduced Flight Gap
Material: Superior grade
of cold rolled special
ferritic stainless steel
Length: 10?.
编号：SNR6694512N
●产品描述：
Hook Spanners
SNR Hook spanners enable the safe and effortless tightening and loosening of all KM, KML and KMK type locknuts and avoid damage to the nuts or shaft.
Manufactured from tempered steel, these spanners are extremely strong and robust.
编号：WEG6934498X
●产品描述：
W22 3 Phase Motors - A Revolution in Energy Efficiency
The W22 is a range of three-phase induction motors which reduces energy consumption, noise, vibration and cost of ownership.With an aerodynamic frame, redesigned cooling system, unique WISE insulation system and new WSeal 'V' Ring with double lip and metallic cap, the W22 range of motors is quieter, more reliable, easier to maintain and more cost effective.
Cast Iron IE3 Multi-Voltage Three Phase Motors
Cast iron frame motors - IE3 (Premium Efficiency) three-phase motors. These motors exceed the IE3 New European Minimum Energy Performance Standard (EU MEPS). Thermisters fitted as standard in frame 160 and above. IP55 protection as standard (up to IP66 on request).
编号：SNR6853655M
●产品描述：
Cylindrical Roller Bearings
Single row cylindrical roller bearings with inner and outer rings. Several styles are available in this series with one or two ribs on either the inner or outer rings. These can support high radial loads and higher speeds due to the cage design than the full compliment designs. The bearings are separable and easier to fit and dismantle.
Non-Locating Type with two Ribs on Outer Ring and Inner Ring is without Ribs
编号：SNR6852800N
●产品描述：
Cylindrical Roller Bearings
Single row cylindrical roller bearings with inner and outer rings. Several styles are available in this series with one or two ribs on either the inner or outer rings. These can support high radial loads and higher speeds due to the cage design than the full compliment designs. The bearings are separable and easier to fit and dismantle.
Non-Locating Type with two Ribs on Inner Ring and Outer Ring is without Ribs
编号：OPB6958099H
●产品描述：
V-Grooved Pulleys for Taper Bushes
Grooves to ISO/BS/DIN 2211.
Belt Section 17/B (SPB/17)
编号：CTT6887909K
●产品描述：
Conti-V Ultraflex
Narrow Section Wrapped V-Belts conform to DIN 7753 and BS 3790. Moderately oil-resistant. Resistant to temperatures from -55C to +70C. Electrically conductive (anti-static) to ISO 1813. Insensitive to dust. Suitable for tropical climates.
Belt Section 22/C (SPC/22)
编号：CTT6887849D
●产品描述：
Conti-V Ultraflex
Narrow Section Wrapped V-Belts conform to DIN 7753 and BS 3790. Moderately oil-resistant. Resistant to temperatures from -55C to +70C. Electrically conductive (anti-static) to ISO 1813. Insensitive to dust. Suitable for tropical climates.
Belt Section 17/B (SPB/17)
编号：SNR6718130K
●产品描述：
SNR Bearings
SNR has developed a complete range of high quality ball thrust bearings. Thrust bearings are designed to maintain the shaft in one single direction. They admit low rotating speeds and sustain high axial loads.
You are strongly advised against submitting them to radial loading. Ball thrust bearings are comprised of separate items facilitating installation and maintenance. Grease and oil lubrication is feasible.
Applications: vertical shaft, lathe tailstock, plate-type pumps.
51300 Series Ball Thrust Bearings
编号：SNR6718120G
●产品描述：
SNR Bearings
SNR has developed a complete range of high quality ball thrust bearings. Thrust bearings are designed to maintain the shaft in one single direction. They admit low rotating speeds and sustain high axial loads.
You are strongly advised against submitting them to radial loading. Ball thrust bearings are comprised of separate items facilitating installation and maintenance. Grease and oil lubrication is feasible.
Applications: vertical shaft, lathe tailstock, plate-type pumps.
51200 Series Ball Thrust Bearings