产品 / 轴承 & 滚轴
品牌
分类
传动电机&装备
传动链条类
传动轮
传动橡胶皮带类
传动轴锁紧装置
滚针(柱)轴承
滚珠轴承
轴承检测&拆装 设备
轴承座&附件
12B-1 BS CHAIN DIN8187 BLUE BOX 110066 25FT

12B-1 BS CHAIN DIN8187 BLUE BOX 110066 25FT

编号:REN6901022G
●产品描述:
Roller Chain

Renold Blue Box chain with their unique control over pin/bush contact, ensures that little initial chain adjustment is therefore required. Renold Blue Box roller chain is highly fatigue resistant with breaking loads exceed the minimum requirements of the international standards.
The specification of Renold chain has evolved from decades of design, test and application experience which delivers product reliability and consistency. Other sizes from 5/16” to 2” pitch are also available please ask for details.
Conforms to: DIN8187/IS606

Simplex Chain

6015 DEEP GROOVE BALL BEARING

6015 DEEP GROOVE BALL BEARING

编号:SNQ6712000F
●产品描述:
SNR Deep Groove Ball Bearings

Open type 25mm bore bearing for the free circulation of either oil or grease.
Size: 25 x 47 x 14mm.



6206-C3-J30 DEEP GROOVE BALL BEARING

6206-C3-J30 DEEP GROOVE BALL BEARING

编号:SNR6701670G
●产品描述:
Deep Groove Ball Bearings - C3 Clearance

C3 bearings have an additional internal radial clearance to cope with high speed environments where excess heat is generated.

Open type:

Without seals to allow for the free circulation of either oil or grease.
170XL037 TIMING BELT

170XL037 TIMING BELT

编号:CTV6881021Y
●产品描述:
Conti Synchrobelt Timing Belts

? Moderately oil-resistant
? Temperature range -20C up to +100C
(depending on application)
? Non-aging and ozone-resistant
? Suitable for tropical climates
Size designation (example)
150XL037
150 150? (381.0mm) pitch length
XL 0.2? (5.08mm) tooth pitch
037 3/8? (9.25mm) timing belt width

DIN 5296

SPZ1520 CONTI-V WEDGE BELT

SPZ1520 CONTI-V WEDGE BELT

编号:CTT6888082P
●产品描述:
Conti-V Ultraflex

Narrow Section Wrapped V-Belts conform to DIN 7753 and BS 3790. Moderately oil-resistant. Resistant to temperatures from -55C to +70C. Electrically conductive (anti-static) to ISO 1813. Insensitive to dust. Suitable for tropical climates.

Belt Section 10/Z (SPZ/10)

XPB1600 OPTIBELT-SUPER X-POWER V-BELT RAW EDGE

XPB1600 OPTIBELT-SUPER X-POWER V-BELT RAW EDGE

编号:OPB6885107H
●产品描述:
Super X-Power V-Belt

Moulded Cogged Raw Edge Wedge Belts



Belt Section 17/B (SPB/17)
SPB3000 CONTI-V WEDGE BELT

SPB3000 CONTI-V WEDGE BELT

编号:CTT6887839S
●产品描述:
Conti-V Ultraflex

Narrow Section Wrapped V-Belts conform to DIN 7753 and BS 3790. Moderately oil-resistant. Resistant to temperatures from -55C to +70C. Electrically conductive (anti-static) to ISO 1813. Insensitive to dust. Suitable for tropical climates.

Belt Section 17/B (SPB/17)

130XL031 TIMING BELT

130XL031 TIMING BELT

编号:CTV6881009K
●产品描述:
Conti Synchrobelt Timing Belts

? Moderately oil-resistant
? Temperature range -20C up to +100C
(depending on application)
? Non-aging and ozone-resistant
? Suitable for tropical climates
Size designation (example)
150XL037
150 150? (381.0mm) pitch length
XL 0.2? (5.08mm) tooth pitch
037 3/8? (9.25mm) timing belt width

DIN 5296

16016 DEEP GROOVE BALL BEARING

16016 DEEP GROOVE BALL BEARING

编号:SNQ6714060S
●产品描述:
Deep Groove Ball Bearings

Widely used in machinery, automobiles, tractors, machine tools, motors, pumps, agricultural machinery and other high speed facilities.



MB2 LOCKWASHER

MB2 LOCKWASHER

编号:SNR6816970E
●产品描述:
Tab Washers

Tab washers are used for securing KM series lock nuts. They have an inner tab for location on the adaptor sleeve. One of the external tabs is bent over a slot when used wit the
KM series lock nuts.