产品 / 轴承 & 滚轴
编号：SNR6701900D
●产品描述：
SNR Deep Groove Ball Bearings
With Shields
编号：SNR6852745P
●产品描述：
Cylindrical Roller Bearings
Single row cylindrical roller bearings with inner and outer rings. Several styles are available in this series with one or two ribs on either the inner or outer rings. These can support high radial loads and higher speeds due to the cage design than the full compliment designs. The bearings are separable and easier to fit and dismantle.
Non-Locating Type with two Ribs on Inner Ring and Outer Ring is without Ribs
编号：SNR6701900G
●产品描述：
SNR Deep Groove Ball Bearings
With Shields
编号：SNR6852800J
●产品描述：
Cylindrical Roller Bearings
Single row cylindrical roller bearings with inner and outer rings. Several styles are available in this series with one or two ribs on either the inner or outer rings. These can support high radial loads and higher speeds due to the cage design than the full compliment designs. The bearings are separable and easier to fit and dismantle.
Non-Locating Type with two Ribs on Inner Ring and Outer Ring is without Ribs
编号：SNR6816971N
●产品描述：
Tab Washers
Tab washers are used for securing KM series lock nuts. They have an inner tab for location on the adaptor sleeve. One of the external tabs is bent over a slot when used wit the
KM series lock nuts.
编号：SNQ6712200Q
●产品描述：
SNR Deep Groove Ball Bearings
Rubber seals inserted into the outer raceway and in contact with the inner race providing protection against the ingress of moisture, dust and other foreign objects.
编号：SNQ6712835P
●产品描述：
SNR Deep Groove Ball Bearings
With Shields
编号：SNR6738545N
●产品描述：
Housed Bearing Units
Housed Bearing Units are one of the most effective and easiest solution to accomodate misalignment. Units below consist of housing and insert. A wide range is available including Imperial sizes. Please ask for further information.
Plummer Blocks - Standard Series - MP Type
Cast iron self lube unit plummer blocks. Standard series. With two slotted holes or fixing.
编号：SNR6816972L
●产品描述：
Tab Washers
Tab washers are used for securing KM series lock nuts. They have an inner tab for location on the adaptor sleeve. One of the external tabs is bent over a slot when used wit the
KM series lock nuts.
编号：SNR6816953S
●产品描述：
Lock Nuts
Used primarily to help lock and locate bearings on shafts or adaptor sleeves. They have evenly spaced slots on the circumference for use with the SNR range of hook spanners.