产品 / 轴承 & 滚轴
编号：NTN6718010F
●产品描述：
Thrust Ball Bearings
Thrust Bearings are designed primarily to support axial loads at contact angles between 30° and 90°. Just as with radial bearings, these bearings differ according to the type of rolling element they use. With thrust bearings, it is necessary to supply an axial preload in order to prevent slipping movement between the bearing's rolling element and raceways.
Comprising of caged ball bearing element and pair of shaft housing washers (bearing shaft washer and housing washer, and the normal contact angle is 90°. Axial loads can be supported in only one direction, radial loads cannot be accommodated. Spherical roller and needle roller versions are also available.
编号：SNR6714480H
●产品描述：
Self-Aligning Ball Bearings
2200 & 2300 Series self-aligning ball bearings are double row with a concave raceway to allow approximately 4° of misalignment. These are cylindrical type but are also available with seals & taper bore for use with adaptor sleeves.
Taper Bore
编号：SNR6718121D
●产品描述：
SNR Bearings
SNR has developed a complete range of high quality ball thrust bearings. Thrust bearings are designed to maintain the shaft in one single direction. They admit low rotating speeds and sustain high axial loads.
You are strongly advised against submitting them to radial loading. Ball thrust bearings are comprised of separate items facilitating installation and maintenance. Grease and oil lubrication is feasible.
Applications: vertical shaft, lathe tailstock, plate-type pumps.
51200 Series Ball Thrust Bearings
编号：SNR6714580H
●产品描述：
Self-Aligning Ball Bearings
2200 & 2300 Series self-aligning ball bearings are double row with a concave raceway to allow approximately 4° of misalignment. They have a tapered bore for use with adaptor sleeves. There are also a range of sealed versions available.
Taper Bore
编号：SNR6738531J
●产品描述：
Housed Bearing Units
Housed Bearing Units are one of the most effective and easiest solution to accomodate misalignment. Units below consist of housing and insert. A wide range is available including Imperial sizes. Please ask for further information.
Flanged Housing Unit - MSF Type Square - Four Bolt
Made of grey cast iron with four fixing holes.
编号：SNR6701681C
●产品描述：
Deep Groove Ball Bearings - C3 Clearance
C3 bearings have an additional internal radial clearance to cope with high speed environments where excess heat is generated.
Open type:
Without seals to allow for the free circulation of either oil or grease.
编号：NTN6857381W
●产品描述：
Taper Roller Bearings
Tapered roller bearings are comprised of solid inner and outer rings with raceways, taper rollers and cages manufactured from pressed steel. The bearings are not self-retaining. As a result, the inner ring with the rollers can be fitted separately from the outer ring. Tapered roller bearings are not sealed and not supplied grease filled.
编号：NTN6857004M
●产品描述：
Taper Roller Bearings
Tapered roller bearings are comprised of solid inner and outer rings with raceways, taper rollers and cages manufactured from pressed steel. The bearings are not self-retaining. As a result, the inner ring with the rollers can be fitted separately from the outer ring. Tapered roller bearings are not sealed and not supplied grease filled.
编号：SNR6701650F
●产品描述：
Deep Groove Ball Bearings - C3 Clearance
C3 bearings have an additional internal radial clearance to cope with high speed environments where excess heat is generated.
Open type:
Without seals to allow for the free circulation of either oil or grease.
编号：NTN6857043W
●产品描述：
Taper Roller Bearings
Tapered roller bearings are comprised of solid inner and outer rings with raceways, taper rollers and cages manufactured from pressed steel. The bearings are not self-retaining. As a result, the inner ring with the rollers can be fitted separately from the outer ring. Tapered roller bearings are not sealed and not supplied grease filled.