Kennedy Multibender Pipe Tool

Precision bending up to 180 on copper and thin wall steel tubing. Bends tube without distortion. Formers and guides will accept 12, 15 & 22mm O/D tube. For use in the plumbing, heating, refrigeration and air conditioning industries.

Pipe Cutters & Wheels

Single cut wheel with two (3 - 30mm) and four (5 - 64mm) rollers. Suitable for stainless steel, brass and copper tubes. With deburring blade.
*5550K has quick release mechanism.

Kennedy Multi Key - 4-Way

For gas, water & electric meter boxes, air conditioning units, stop valves, mains consoles etc., central heating pump cocks, some radiator valves and drain off valves.

Tube Cutting & Bending Set

Contains flaring press, 45 spreader, 30mm capacity tube cutter, tube springs 14, 18, 16 and 20mm dia. Robust moulded case.

Swedish Pattern Pipe Wrenches

Narrow design for confined areas, used for gripping pipe and nuts. Forged chrome vanadium heat treated steel. Knurled adjusting nut with guiding reinforcement on handle. Conform to DIN 5234.

"S" Type

"S" shaped jaws grip at three points to ensure a maximum grip.

Kennedy Automotive Chain Pipe Cutter

Cuts thin wall pipe (stainless steel, copper, PVC etc.) up to 2.6mm thickness. The grip action eliminates hand gripping effort to ensure perfect tracking. Can be used for efficient cutting of exhaust pipes.

Kennedy Drain Rods

The Kennedy double worm screw for Kennedy drain rods pierce blockages such as paper or rags and the obstruction is drawn back to clear the pipe.
Available with two different type of joints:

Universal: Rods fitted with this type of joint should only be rotated in a clockwise direction.

Lockfast: Rods fitted with this type of joint can be rotated in either direction and will remain secure in the most demanding conditions.

4?? Double Worm Screw Universal Type

Kennedy Drain Rods

The Kennedy drop scraper when used with Kennedy drain rods glides over small obstructions and drops into a vertical position to allow material to be dragged back.

Available with two different type of joints:

Universal: Rods fitted with this type of joint should only be rotated in a clockwise direction.

Lockfast: Rods fitted with this type of joint can be rotated in either direction and will remain secure in the most demanding conditions.

4?? Drop Scraper ?Lockfast?

Hinged Pipe Vice

Hinged pipe vice, used for repetitive tasks on pipework. The frame of the pipe vice is made from cast iron with jaws made from hardened tool grade alloy steel with a corrosion resistant coating. The top jaw of the pipe vice is held in position with a hook which automatically engages when the vice is closed. Can be fitted to bench or stand.

Pipe Vice & Stand

Hinged pipe vice, used for repetitive tasks on pipework. The frame of the pipe vice is made from cast iron with jaws made from hardened tool grade alloy steel with a corrosion resistant coating. The top jaw of the pipe vice is held in position with a hook which automatically engages when the vice is closed. Can be fitted to bench or stand.



Stand is of robust construction and is suitable for workshop and site use. Essential for use whilst cutting, bending and threading pipework. The stand is fitted with an integral tray for holding tools and fittings, wide angled legs give greater stability and the folding design provides easy storage and transportation. Fitted with anti-skid duck board for operator safety.