Spares and Accessories

To suit the Kennedy Drop Head Threader (KEN-588-8800K).

Kennedy Multibender Pipe Tool

Precision bending up to 180 on copper and thin wall steel tubing. Bends tube without distortion. Formers and guides will accept 12, 15 & 22mm O/D tube. For use in the plumbing, heating, refrigeration and air conditioning industries.

Spare Jaw & Nut

To suit Kennedy Standard Duty Pipe Wrenches

Kennedy Drain Rods

The rubber plunger for Kennedy drain rods builds up pressure in the water to force obstruction clear. One piece rubber.

Available with two different type of joints:

Universal: Rods fitted with this type of joint should only be rotated in a clockwise direction.

Lockfast: Rods fitted with this type of joint can be rotated in either direction and will remain secure in the most demanding conditions.

6?? Rubber Plunger Universal Type

Kennedy Multibender Pipe Tool

Precision bending up to 180 on copper and thin wall steel tubing. Bends tube without distortion. Formers and guides will accept 12, 15 & 22mm O/D tube. For use in the plumbing, heating, refrigeration and air conditioning industries.

Pipe Cutters & Wheels

Single cut wheel with two (3 - 30mm) and four (5 - 64mm) rollers. Suitable for stainless steel, brass and copper tubes. With deburring blade.
*5550K has quick release mechanism.

Kennedy Multi Key - 4-Way

For gas, water & electric meter boxes, air conditioning units, stop valves, mains consoles etc., central heating pump cocks, some radiator valves and drain off valves.

Kennedy Drain Rods

The Kennedy drop scraper when used with Kennedy drain rods glides over small obstructions and drops into a vertical position to allow material to be dragged back.

Available with two different type of joints:

Universal: Rods fitted with this type of joint should only be rotated in a clockwise direction.

Lockfast: Rods fitted with this type of joint can be rotated in either direction and will remain secure in the most demanding conditions.

6?? Drop Scraper ?Lockfast?

Stand & Tool Tray

Stand is of robust construction and is suitable for workshop and site use. Essential for use whilst cutting, bending and threading pipework. The stand is fitted with an integral tray for holding tools and fittings, wide angled legs give greater stability and the folding design provides easy storage and transportation. Fitted with anti-skid duck board for operator safety.

Kennedy Drain Rods

The Kennedy drop scraper when used with Kennedy drain rods glides over small obstructions and drops into a vertical position to allow material to be dragged back.

Available with two different type of joints:

Universal: Rods fitted with this type of joint should only be rotated in a clockwise direction.

Lockfast: Rods fitted with this type of joint can be rotated in either direction and will remain secure in the most demanding conditions.

4?? Drop Scraper ?Lockfast?