Kennedy Drain Rods

The rubber plunger for Kennedy drain rods builds up pressure in the water to force obstruction clear. One piece rubber.

Available with two different type of joints:

Universal: Rods fitted with this type of joint should only be rotated in a clockwise direction.

Lockfast: Rods fitted with this type of joint can be rotated in either direction and will remain secure in the most demanding conditions.

4'' Rubber Plunger Universal Type

Adjustable Pipe Wrench

A general purpose pipe wrench with milled and hardened teeth which grips the workpiece tighter the more pressure is applied. Pressed steel handle with high carbon steel profiled jaws and knurled thumb-adjusting nut that easily adjusts with one hand.



Overall length: 300m (12")

Kennedy Drain Rods

The rubber plunger for Kennedy drain rods builds up pressure in the water to force obstruction clear. One piece rubber.

Available with two different type of joints:

Universal: Rods fitted with this type of joint should only be rotated in a clockwise direction.

Lockfast: Rods fitted with this type of joint can be rotated in either direction and will remain secure in the most demanding conditions.

6?? Rubber Plunger Universal Type

Kennedy Multibender Pipe Tool

Precision bending up to 180 on copper and thin wall steel tubing. Bends tube without distortion. Formers and guides will accept 12, 15 & 22mm O/D tube. For use in the plumbing, heating, refrigeration and air conditioning industries.

Drain Test Bung

Used to pressure test or temporarily seal the end of an open pipe which is newly laid or decomissioned, preventing the ingress of water, gasses, rodents.

Spare Blades for Kennedy Plastic Pipe Cutters

Capacity: 12-42mm. To suit Kennedy Plastic Pipe Cutter (KEN-588-5842K)

Pipe Cutters & Wheels

Single cut wheel with two (3 - 30mm) and four (5 - 64mm) rollers. Suitable for stainless steel, brass and copper tubes. With deburring blade.
*5550K has quick release mechanism.

Spare Jaw & Nut

To suit Kennedy Heavy Duty Pipe Wrenches

Kennedy Stillson Pipe Wrenches

Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes & nuts. Cast iron frame, drop forged handles and jaws. All moving parts are heat treated. Used mainly in the plumbing industry for gripping pipes and nuts. Conform with BS 3594 : Part 2. Available in 7 sizes ranging from 8" - 36".

Standard Duty

Kennedy Drain Rods

Kennedy drain rods are the essential tool to have to easily and rapidly unblock drains, pipes or sewers. They are manufactured to exacting industry quality standards using polypropylene rod tubing that is fitted with solid brass threaded joints securely fixed in place with brass rivets. These Kennedy drain rods are strong, durable and are slightly flexible to ensure the rods have the right amount of flex to make it easier to feed them into the drain through the inspection hatch and to follow the bends in any drain, pipe or sewer. A full range of plunger, worm screw and drop scraper attachments are available.

Available as two different types of rod connecting joints:

Universal screwed thread connectors for rapid assembly and disassembly.
Lockfast retaining nut joints are secured with a spanner.

For the full range of Kennedy Plumbing tools please refer to our catalogue.

Heavy Duty 'Lockfast' Flexible Drain Rods Set

The Kennedy heavy duty drain rods have a lockfast retaining nut that must be tightened or loosened with a spanner, rods fitted with this type of joint can be rotated in either direction in use and will remain securely fastened in even the most demanding of conditions.

Set Contents;
10 x 20mm x 900mm LRN joint rods
1 x 100mm double worm screw
1 x 100mm Plunger
1 x 100mm Drop scraper
Also supplied with 2 rod ties.