Hydraulic Couplings

A range of one piece, no weep couplings covering a huge range of styles and terminations. Patented 'C' insert ensures an evenly distributed crimp. One coupling can be used with 1-wire and 2-wire hoses of various outside diameters. Reduced stockholding for an easier to manage inventory.

Key features:
Revolutionary one-piece design.
"Leak-free" concentric insert.
Optimum insertion force.
Patented "C" insert "Bite-the-wire" crimp.
No - skive.

Female BSP, O-Ring Swivel, 60 Cone, 90 Swept Elbow

Type FBSPORX90

SMC Pneumatic Fittings

Air Cylinders
CD85 Series
Double acting.

CD85 Series Air Cylinders

Pleated Panel Air Filters

Ideally suited for use in heating, ventilating, and air conditioning systems where:
Standard pre-filters are insufficient protection for the required levels of air cleanliness.
Glass media is unacceptable (eg. food and pharmaceutical industries, and in some hospital areas).
The critical nature of the installation demands a combination of high arrestance, coupled with control over smaller particles.

This product is suitable for computer room free-standing units.

Air Filters

Series S6510

Micro Super-Rapid fittings allow fast connection and disconnection of plastic tube, it can be repeated several times and can be performed using one hand and without the use of tools. The sealing ring (O-Ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. This advantage derives from the simple execution of the internal collet, which can be extracted allowing the replacement of the O-Ring.

General data:
Material body and collet: brass OT nickel-plated O-Ring NBR, seal PTFE, NBR, PA
Threads: M3, M5, M7, G1/8, G1/4.
Pressure: min. -0,8 to max. 16 bar (see tubing).
Tube to connect rilsan: PA 6 - 11 - 12 , polyethylene, polyurethane.
Diameters: 3, 4, 6, 8 and 10mm.
Fluid: compressed air (for other types of fluid, contact our engineers).
Temperature: -10C to 60C (see data for tubing used).



Male Stud Coupling

Series S6520

Micro Super-Rapid fittings allow fast connection and disconnection of plastic tube, it can be repeated several times and can be performed using one hand and without the use of tools. The sealing ring (O-Ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. This advantage derives from the simple execution of the internal collet, which can be extracted allowing the replacement of the O-Ring.

General data:
Material body and collet: brass OT nickel-plated O-Ring NBR, seal PTFE, NBR, PA
Threads: M3, M5, M7, G1/8, G1/4.
Pressure: min. -0,8 to max. 16 bar (see tubing).
Tube to connect rilsan: PA 6 - 11 - 12 , polyethylene, polyurethane.
Diameters: 3, 4, 6, 8 and 10mm.
Fluid: compressed air (for other types of fluid, contact our engineers).
Temperature: -10C to 60C (see data for tubing used).



Male Stud Swivel Elbow

Bosch Rexroth Pneumatic Fittings

Rexroth QR1 Series push in pneumatic fittings type are available for inch tubing/NPT threads and metric tubing/ISO-G (BSPP) threads. The user friendly oval release ring allow the push-in fittings to quickly release from the tubing much more easily than traditional round release rings. QR1 fittings come in standard and mini sizes, plus function fittings such as ball valves, check valves, flow control etc. They feature premium materials such as the stainless steel tube locking mechanism and polymer body and release ring.

QR1-RVL Series Long Elbow Pneumatic Fitting

Standard metric M5-G 1/2 Long Elbow push fit pneumatic fitting for compressed air hoses: 4 to 16mm diameter.

For further specification on this product please see the attached PDF under the additional information tab.

Pressure Switches

Attaches to new modular FRL system. Operational pressure setting made easy by scale plate. Shield plate attached to prevent external magnetic interference.

Low Pressure 2 Way Ball Valve

Female x female valves which combines good design with superior materials and engineering to provide long operating life with low maintenance costs.
Materials:
Body: brass, surface nickel plated.
Ball: brass, nickel and mirror finish chrome plated.
Spindle: brass.
Seat/seals: PTFE.
O-Ring: Viton.
Handle: steel lever c/w thermo insulating sleeve.
Threads: manufactured to ISO-7 unless otherwise stated.

Port Size Pressure Rating (Bar)
? 64
3/8? 64
? 64
? 40
1? 40
1? 25
1? 25

KHN88 Series

Camozzi Female Run Tees

2050
Series 2000 pipe fittings BSPT adaptor male/female run Tee.
Available in threads:
G1/8 overall length 37mm.
G1/4 overall length 46mm.
G3/8 overall length 48.5mm.
G1/2 overall length 60.5mm.

SMC Pneumatic Fittings

The air checker, PS1 series, electronic pressure switch is available for positive pressure and for vacuum. PS1 is extremely compact and lightweight. Dimensions are 13x10x30mm (WxHxL) for standard type without connection part.

PS1 Series Electronic Pressure Switch