Push-fit System - Compressed Air

Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard.
Working Temperature Range
Minimum Working Temperature -20C
Maximum Working Temperature +70C
Working Pressure
Temperature Pressure
+23C 10 Bar
+70C 7 Bar

Equal Elbows

Connects plain pipe at 90.

Mounting Accessories

Trunnion Brackets

Mounting Accessories

Foot mount (pair)

Pressure Line Filter Elements

The selection of the perfect filtration solution contributes significantly to prevent damage caused by contamination whilst increasing productivity and reducing maintenance costs. The new filter element technology used in Betamicron4, has been specially developed to ensure sensitive components are protected, whilst the filter element has a significantly longer service life providing a high level of cleanliness and long-term stability for your hydraulic or lubrication systems.

Type R - Return Line Type

Camozzi Bulkhead Couplings

6590
Super-rapid fittings for plastic tubes. Push-in fitting bulkhead coupling.
Available in 4mm, 6mm, 8mm, 10mm and 12mm tubes.

Auto-Switches

Auto Switches

SMC AN101-01 Series BC Sintered Body Silencer

Ideal for the exhaust of a compact valve or pilot air.

AN101-01 Specification:
Port size: 1/8.
Effective area (mm2): 20.
Fluid: compressed air.
Max. operating pressure: 1.0MPa.
Noise reduction: 16dB(A).
Ambient and fluid temperature: 5 to 50C.
Weight: 9.5g.

PCL ?Standard? Airline Couplings

The 'Industry Standard' coupling. For use with air tools, garage, industrial air line supplies and test panels. Free air flow rate at 7bar/100PSI: 35 to 42 cfm (990 to 1130ltr/min). Zinc plated all steel construction, finished in hard wearing passivate. Stainless steel springs and balls. Positive single locking action prevents accidental dislocation. For fixed applications - for couplings for trailing hoses see 'Vertex' type below.

Female Threaded

3/8" BSPT.

Camozzi Male Branch Tees - Taper

2060
Series 2000 pipe fittings BSPT adaptor male/female branch Tee.
Available in G1/8, G1/4, G3/8 and G1/2 threads.

Kobe? ?Vertex? Airline Couplings

As 'Standard' type above but with slim profile, double locking action and additional collar to prohibit dirt ingress. Designed for trailing hoses.

Female Threaded

1/4" BSPT.