Base Mounted Solenoid Valves

IP67 base mounted valves. Easy to expand manifolds. Cassette and tie rod manifold construction. Wide choice of serial transmission options. Dual three port valve bodies available.

Copely Contractors Hose

BCH Series
The unreinforced PVC contractors hose has been designed as a high quality flexible and durable low pressure water hose.
Colour black. Supplied in 75m coils.

Special features:
Excellent abrasion resistance.
Manufactured from cadmium free materials.
Resistance to a wide range of chemicals.
Outstanding U.V/Ozone resistance.
Silicone free.
Flexible.
High quality fluted water hose.
Medium duty cold water hose.

Series 61 Aluminium Profile Cylinders

Double Acting.
Standard DIN/ISO 15552.
Stainless steel piston rod.
Anodised aluminium extrusion cylinder barrel.
Cast aluminium End Blocks.
Stroke min-max lengths: 10-1000mm.
Bore sizes: Ø 32, 40, 50, 63, 80, 100, 125mm.
Operating temperature: 0°C to +80°C (with dry air -20°C to +80°C).
Operating Pressure: 1 to 10 bar.
Speed: 10 to 1000mm/sec (no load).
Connections: Ø 32 – 1/8”, Ø 40, 50 – ¼”, Ø 63, 80 –3/8”, Ø 100, 125 – 1/2”.

SMC One-Touch Male Elbow Connectors

KQL
Most common style used to pipe from female thread at a right angle. Colour: black.
KQL04-01S: Tube O.D. 4mm. Thread: R1/8.
KQL04-M5: Tube O.D. 4mm. Thread: M5 x 0.8.
KQL06-01S: Tube O.D. 6mm. Thread: R1/8.
KQL06-02S: Tube O.D. 6mm. Thread: R1/4.
KQL08-02S: Tube O.D. 8mm. Thread: R1/4.

Push-fit Solution for Plumbing & Heating Systems

For use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes Speedfit fittings can be used with copper pipe to BS EN 1057 and Speedfit cross-linked polyethylene (PEX) Barrier Pipe to BS7291. NOT to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standard Speedfit products are designed and manufactured under a fully integrated system assessed by B.S.I. to BS EN ISO9001. They are approved by the Water Regulations Advisory Scheme and BBA. Speedfit PEM' and PKM' fittings and Speedfit barrier pipe are kitemarked to BS7291 Part 1 and 3, Class S. (Licence No. KM39767). Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings. Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight. When used outdoors protect from ultra violet light by lagging or painting. It is recommended that all installations are checked prior to use to determine that a seal has been made.
Working temperatures and pressures: Central Heating: 3.0 bar at 92C. Hot Water: 6.0 bar at 65C. Cold Water: 12.0 bar at 20C.

Service Valve

Complies with water regulations, building regulations and British Standards.

SMC One-Touch Mini Female Adaptor

KJF
Use to pipe from male thread such as pressure gauge.
KJF04-M5: Tube O.D. 4mm. Thread T: M5 x 0.8.

Hydraulic Couplings

A range of one piece, no weep couplings covering a huge range of styles and terminations. Patented 'C' insert ensures an evenly distributed crimp. One coupling can be used with 1-wire and 2-wire hoses of various outside diameters. Reduced stockholding for an easier to manage inventory.

Key features:
Revolutionary one-piece design.
"Leak-free" concentric insert.
Optimum insertion force.
Patented "C" insert "Bite-the-wire" crimp.
No - skive.

Female DIN, O-Ring Swivel. 34° Cone - Heavy Series, 90° Swept Elbow

Drop dimensions meet ISO 12151-2.

SMC Pneumatic Fittings

The speciality regulator series VBA is a booster regulator that saves money and energy by increasing the main line pressure up to two times. The booster regulator, when connected to the air supply line, increases pressure up to two times and the main air supply pressure may be set low. Desired pressure increase can be easily adjusted.

VBA Series Booster Regulators

Body Size: 20A (3/8, Handle-operated type)
Port Size: 03 (3/8)
Option: GN (Pressure Gauge (2 pcs), Silencer)

Pneumatic Tube Cutter with Safety Lock

TK-3
Low cost plastic pneumatic tube cutter with safety lock. Cuts through nylon, soft nylon, polyurethane and other soft plastic tubings.
Size (L x H): 110 x 43mm.
Weight: 32g.

SMC Plug Connectors

KQ2P

KQ2P-04: Fit dia: 4mm.
KQ2P-06: Fit dia: 6mm.
KQ2P-08 Fit dia: 8mm.
KQ2P-10: Fit dia: 10mm.
KQ2P-12: Fit dia: 12mm.



Colour: white.