Rexroth Straight Plug Connectors

QR1-RSK Series
Push-in fitting straight plug connector.
Available in diameters: 4, 6, 8, 10, 12 and 14mm.

Ambient temperature min/max: +0°C/+60°C.
Working pressure min./max: -0.95 bar/10 bar.
Materials:
Housing: Polybutyleneterephthalate.
Seal: Acrylonitrile Butadiene Rubber.
Tooth lock washer: Stainless steel.
Release ring: Polyoxymethylene.
Release ring holder: Die cast zinc; Brass, nickel-plated.

Camozzi Tube To Tube Elbows

7550
Super-rapid compact fitting Technopolymer equal tube elbow.
Available in 4, 6, 8, 10mm tubes.

Kennedy® Piston Rod Mountings

For Euroking ISO 6431 Cylinders Piston Rod Eye KPRE. Available in cylinder diameters of 32mm, 40mm, 50-63mm and 80-100mm.

Pneumatically Operated Valves

Series: 3
Function: 3/2
Port: 1/4
Actuation - Return: Pilot Spring

Pneumatically Operated Valve - Pilot Spring

Kennedy® Ultra-Power Cylinders

Double acting pneumatic cylinder. Non-lube. Adjustable end cushioning. Diameter: 32mm-100mm. Magnetic piston as standard. ISO 6431 VDMA 24562.

Manually Operated Valves

Series: 3
Function: 5/2
Port: 1/8
Actuation - Return: Lever Spring

Manually Operated Valve - Lever Spring

Body Ported Manifolds

Suitable valves for these manifolds: SY**20 types.

Push-fit System - Compressed Air

Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard.
Working Temperature Range
Minimum Working Temperature -20C
Maximum Working Temperature +70C
Working Pressure
Temperature Pressure
+23C 10 Bar
+70C 7 Bar

Collet Covers

Prevent accidental removal or tampering with piping.

Kennedy® Coils for Solenoid Valves

DIN 43650/B. For use with solenoid valves. IP54. Nominal Size: 22mm. Terminal Pins: 2-Pole + earth.

Bosch Rexroth Pneumatic Fittings

Rexroth QR1 Series push in pneumatic fittings type are available for inch tubing/NPT threads and metric tubing/ISO-G (BSPP) threads. The user friendly oval release ring allow the push-in fittings to quickly release from the tubing much more easily than traditional round release rings. QR1 fittings come in standard and mini sizes, plus function fittings such as ball valves, check valves, flow control etc. They feature premium materials such as the stainless steel tube locking mechanism and polymer body and release ring.

QR1-RTK Series T-Plug Connector Pneumatic Fitting

Standard Metric M5-G T-Plug Connector push fit pneumatic fitting for compressed air hoses: 4 to 16mm diameter.

For further specification on this product please see the attached PDF under the additional information tab.