Blocking Valve

Type: Uni-directional
Size: 1/8

Bosch Rexroth Pneumatic Fittings

Series TC08 and TC15 manifolds or single in-line valves provide a highly reliable, high flow, cost effective solution for a wide variety of applications. The use of polymer technology results in a lightweight and the compact design that permits use in tight spaces. The easy-to assemble manifold system has a reduced height because it does not require sub bases, and quick valve changes make it maintenance friendly. Available as inch and metric porting options and widening customer choice.

TC08 Series Electro Pneumatically Operated Valves

5/2 way valve, series TC08
Qn=800 l/min, pipe connection with compressed air connection output: G 1/8.
Electrical connection: Plug ISO15217, form C.
Manual override: without detent.
Single solenoid, double solenoid.

For further specification on this product please see the attached PDF under the additional information tab.

Gates Hydraulic Couplings

Female JIC Swivel. 37° Inverted Cone,
45° Swept Elbow

Gates Hydraulic Couplings

Female JIC Swivel. 37° Inverted Cone.

High Pressure Float Valve

Manufactured to BS1212, for use in water tanks and cisterns to prevent overflow.

PCL "100 Series" Airline Coupling Adaptors

Case hardened with hard wearing passivate finish. For use with '100 Series' type couplings.

Female Threaded

Push-fit Solution for Plumbing & Heating Systems

For use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes Speedfit fittings can be used with copper pipe to BS EN 1057 and Speedfit cross-linked polyethylene (PEX) Barrier Pipe to BS7291. NOT to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standard Speedfit products are designed and manufactured under a fully integrated system assessed by B.S.I. to BS EN ISO9001. They are approved by the Water Regulations Advisory Scheme and BBA. Speedfit PEM? and PKM? fittings and Speedfit barrier pipe are kitemarked to BS7291 Part 1 and 3, Class S. (Licence No. KM39767). Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings. Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight. When used outdoors protect from ultra violet light by lagging or painting. It is recommended that all installations are checked prior to use to determine that a seal has been made.
Working temperatures and pressures: Central Heating: 3.0 bar at 92C. Hot Water: 6.0 bar at 65C. Cold Water: 12.0 bar at 20C.

?Superseal? Pipe Inserts

The Superseal Pipe Insert has been developed to be used with Speedfit Barrier Pipe and Speedfit fittings to provide an extra line of defence when installing a Speedfit Push Fit System. The insert has its own ?O?Ring which, together with a Stem sliding within the pipe ID, gives a secondary seal against the inside of the fitting. The Speedfit connection, when made with the Insert, has a number of design features. Sliding the stem of the insert into the pipe gives greater compression of the main ?O?Ring on the pipe and greater rigidity of the length of pipe within the fitting, reducing the chance of leaks if a side load is applied. A connection is easier to make because the head of the insert has been designed for ease of insertion.

3 Port Operated Valves

VTA
Three port based mounted air valves that can be manifold mounted.

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Elbow Connector to Male Parallel

Compact Air Cylinders

Compact Air Cylinder - Series CQ2
Standard Type, Single Rod
Single or double acting
Compact, lightweight, space-saving design
Bore sizes 12-200mm
Unique range of products and sizes
Non-rotating piston rod end (12mm bore to 63mm bore)

CQ2 Series