Auto-Switches

Auto Switches

TU Series

Temperature range: -20C to +60C.
29 colours available.
Operating pressure: 0.6Pa.
Prices shown are for 20m coils - 100m coils also available.
Also available in nylon and flame resistant.

SMC Air Preparation



4K8-2.5P Pressure Gauge

Pressure range PSI/BAR: 2.0.
Connection thread: R1/8.
Outside diameter: 40mm.

PCL Tailpieces & Threaded Connectors

A comprehensive range designed for use in conjunction with airline couplings in garage and industrial applications. Case hardened with zinc finish.

Male Threaded Unions

For connecting female threaded fittings of the same size.

Electropneumatically Operated ISO 5599/1 Valves
No. of Positions: 5/2
ISO size: 1
Actuation: Solenoid - Solenoid

No. of Positions: 5/2
ISO size: 1
Actuation: Solenoid - Spring

SMC One-Touch Different Diameter Straight Male Connectors

KQ2H
One-touch fitting different diameter straight/male connector/straight union.

KQ2H04-06: Tube dia: 6mm. Port dia: 4mm.
KQ2H06-08: Tube dia: 6mm. Port dia: 8mm.
KQ2H08-10: Tube dia: 8mm. Port dia: 10mm.
KQ2H10-12: Tube dia: 10mm. Port dia: 12mm.
KQ2H12-16: Tube dia: 12mm. Port dia: 16mm.



Colour: white.

Series 1000 Rapid Fittings for Plastic Tubes

They can be used with rigid PA tubes. A locking nut is provided and can be tightened both manually and with a spanner. The special shape of the guiding cone ensures that the tube cannot be accidentally cut.
General data:
Materials body and nut: nickel-plated brass; O-ring: NBR; thread seals: PTFE, PA, AL
Threads GAS, conical ISO 7 (BSPT) GAS, cylindrical ISO 228 (BSP)

Series 1541 Swivel Elbow Sprint

Camozzi Male Barrel Nipple - Taper

2500
Series 2000 pipe fitting BSPT adaptor nipple.
Available in threads:
G1/8, overall length 19.5mm.
G1/4, overall length 27mm.

PCL "60 Series" Airline Couplings

Designed for general industrial applications - free flow air rate at 7 bar/100PSI: 55 to 60 CFM (1557 to 1698 ltr/min). All steel construction with hard wearing passivate finish. Hardened steel shoulder to prevent accidental disconnection in use. Designed and manufactured in Sheffield by PCL this traditional PCL coupling range offers above average airflow characteristics for general and portable air tool applications in garage and tyre shop environments.
Hardened steel shoulder prevents accidental disconnection
Secure locking device
Swivel feature prevents kinking of the hose
Specially designed valves and large aperture provides optimum air flow.

Male Threaded

3/8" BSPT.

Push-fit System - Compressed Air

Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard.
Working Temperature Range
Minimum Working Temperature -20C
Maximum Working Temperature +70C
Working Pressure
Temperature Pressure
+23C 10 Bar
+70C 7 Bar

Stop End

Compressed Air Fittings
This fitting is made of the following components:-

The body is produced in acetal copolymer
'O'Rings are nitrile rubber
The collet is produced in acetal copolymer with stainless steel teeth