Kennedy® Industrial Quality Airline Hose

Open drum 20M air hose reel. Easy wind reel mechanism. With high impact resistant drum and guide walls. 1/2" air hose fitted with two ear hose clips and standard PCL couplings for 1/2" hose. The axial supply allows the hose to be wound and unwound during operation. Supplied complete with 1.5M supply connection hose and wall mounting hooks.

Through Flow Air Hose

SMC Pneumatic Fittings

The powerful gripping force of the MCH2 air gripper is generated through the use of a double piston mechanism, this maintains a compact design. The MHC series has a built in speed adjustment and a recessed groove for auto switches.

MHC2 Angular Style Air Gripper

Fluid Air
Operating pressure
Double acting 0.1 to 0.6MPa
Ambient and fluid temperature: -10 to 60C
Repeatability: /-0.01mm
Max. operating frequency: 180c.p.m
Lubrication Not required
Action: Double acting.
Auto switch (Option)Note)
Solid state switch (3 wire, 2 wire)
Bore size: 16mm
Holding moment: 0.39 (effective value)
Opening/closing angle ( both sides): 30 to -10
Weight: 91g

For further specification on this product please see the attached PDF under the additional information tab.

Series S6520

Micro Super-Rapid fittings allow fast connection and disconnection of plastic tube, it can be repeated several times and can be performed using one hand and without the use of tools. The sealing ring (O-Ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. This advantage derives from the simple execution of the internal collet, which can be extracted allowing the replacement of the O-Ring.

General data:
Material body and collet: brass OT nickel-plated O-Ring NBR, seal PTFE, NBR, PA
Threads: M3, M5, M7, G1/8, G1/4.
Pressure: min. -0,8 to max. 16 bar (see tubing).
Tube to connect rilsan: PA 6 - 11 - 12 , polyethylene, polyurethane.
Diameters: 3, 4, 6, 8 and 10mm.
Fluid: compressed air (for other types of fluid, contact our engineers).
Temperature: -10C to 60C (see data for tubing used).



Male Stud Swivel Elbow

Pressure Line Filter Elements

The selection of the perfect filtration solution contributes significantly to prevent damage caused by contamination whilst increasing productivity and reducing maintenance costs. The new filter element technology used in Betamicron4, has been specially developed to ensure sensitive components are protected, whilst the filter element has a significantly longer service life providing a high level of cleanliness and long-term stability for your hydraulic or lubrication systems.

Type R - Return Line Type

Series 2520

When involved in factory maintenance or plant installation it is often difficult to be certain which size of fitting will be required. The Camozzi pipe fitting range provides a cost effective solution to this problem. The full range includes straight, L - T shaped and cross piece male or female couplings, all of which are available in a large variety of thread sizes.

General Data:
Material: OT58 (nickel-plated).
Threads: GAS conical ISO 7 (BSPT). GAS cylindrical ISO 228 (BSP).
Pressure: 40 bar.
Fluid: compressed air or other low pressure fluids.
Temperature: -40C to 120C.



Male - Female Reducers

Bosch Rexroth Pneumatic Fittings

Series TC08 and TC15 manifolds or single in-line valves provide a highly reliable, high flow, cost effective solution for a wide variety of applications. The use of polymer technology results in a lightweight and the compact design that permits use in tight spaces. The easy-to assemble manifold system has a reduced height because it does not require sub bases, and quick valve changes make it maintenance friendly. Available as inch and metric porting options and widening customer choice.

TC08 Series Electro Pneumatically Operated Valves

5/2 way valve, series TC08
Qn=800 l/min, pipe connection with compressed air connection output: G 1/8.
Electrical connection: Plug ISO15217, form C.
Manual override: without detent.
Single solenoid, double solenoid.

For further specification on this product please see the attached PDF under the additional information tab.

Pressure Line Filter Elements

The selection of the perfect filtration solution contributes significantly to prevent damage caused by contamination whilst increasing productivity and reducing maintenance costs. The new filter element technology used in Betamicron4, has been specially developed to ensure sensitive components are protected, whilst the filter element has a significantly longer service life providing a high level of cleanliness and long-term stability for your hydraulic or lubrication systems.

Type R - Return Line Type

Auto-Switches

Auto Switches

SMC Air Preparation



4K8 - 10 Pressure Gauge

Pressure range PSI/Bar: 0 to 10.0.
Connection thread: R1/8.
Outside diameter: 40mm.

Kennedy® Ultra-Power Cylinders

Double acting pneumatic cylinder. Non-lube. Adjustable end cushioning. Diameter: 32mm-100mm. Magnetic piston as standard. ISO 6431 VDMA 24562.