Single Solenoid

IP65 single solenoid with manual overide, detent, and throttle.

740 Series

SMC One-Touch Plug-In Elbow

KQL
To change the tubing direction from a one-touch fitting
by 90°. Colour: black.
KQL06-99: Tube O.D. 6mm. Fitting size: 6mm.

Series 32 Compact Magnetic Cylinders

Double Acting.
Standard ISO 21287.
Stainless steel rod.
Anodized aluminium extrusion.
Cast aluminium End Blocks.
Double Acting Stroke min-max Ø 20-25 : 510-500mm, Ø 20 : 10-500mm, Ø 25 : 10-500mm.
Bores: Ø 16, 20, 25.
Operating temperature: 0°C to +80°C (with dry air -20°C to +80°C).
Operating Pressure:
1 to 10 bar (Double-acting).
2 to 10 bar (Single-acting).
Speed: 10 to 1000mm/sec (no load).

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Bulkhead to Female Parallel

SMC One-Touch Stainless Steel Bulkhead Union Connectors

KGE
Used to connect two tubes through a panel.
KGE06-00: Tube O.D. 6mm.
KGE12-00: Tube O.D. 12mm.

Auto-Switches

Auto Switches

Series 1000 Rapid Fittings for Plastic Tubes

They can be used with rigid PA tubes. A locking nut is provided and can be tightened both manually and with a spanner. The special shape of the guiding cone ensures that the tube cannot be accidentally cut.
General data:
Materials body and nut: nickel-plated brass; O-ring: NBR; thread seals: PTFE, PA, AL
Threads GAS, conical ISO 7 (BSPT) GAS, cylindrical ISO 228 (BSP)

Series 1560 Male Stud Swivel

Kennedy® Connector for Valve Coils

ISO 6952/B connector. Nominal Size: 22mm. For use with all makes of DIN 43650 coils. IP65 - EN 60529. Cable fitting: M16 x 1,5.

Pleated Panel Air Filters

Ideally suited for use in heating, ventilating, and air conditioning systems where:
Standard pre-filters are insufficient protection for the required levels of air cleanliness.
Glass media is unacceptable (eg. food and pharmaceutical industries, and in some hospital areas).
The critical nature of the installation demands a combination of high arrestance, coupled with control over smaller particles.

This product is suitable for computer room free-standing units.

Air Filters

Blanking Plate Assemblies

For use in situations where valves may be added in future.