Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Elbow Reducer to Stem

Mechanically Operated Valves

Series: 3
Function: 5/2
Port: 1/8
Actuation: Roller/Lever

Mechanically Operated Valve - Roller/Lever - Spring

Floating Joints

Absorbs both angular and eccentric misalignment. Reduces mounting time of actuator. Compact and lightweight.

Kennedy® Air Regulators

Push to lock non-rising control knob. 1/4" female outlet & inlet. Used to maintain steady outlet pressure unaffected by variations in inlet pressure. Can be installed in any position. Two gauge ports for versatile unit location. Complete with neck-mounting ring. These conventional pressure regulators can be used individually or in conjunction with combination air preparation units.
Port: 1/4".
Max PR: 215 PSI (15 bar).
Set PR: 7-140 PSI (0.5-10 bar).

AR250 Air Regulator

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Tee

SMC Self-Align Tube Fitting Male Connector

Series H
Compression fitting.
H06-02:
Tube O.D. 6mm.
Thread: R1/4.

Series S6440

Micro Super-Rapid fittings allow fast connection and disconnection of plastic tube, it can be repeated several times and can be performed using one hand and without the use of tools. The sealing ring (O-Ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. This advantage derives from the simple execution of the internal collet, which can be extracted allowing the replacement of the O-Ring.

General data:
Material body and collet: brass OT nickel-plated O-Ring NBR, seal PTFE, NBR, PA
Threads: M3, M5, M7, G1/8, G1/4.
Pressure: min. -0,8 to max. 16 bar (see tubing).
Tube to connect rilsan: PA 6 - 11 - 12 , polyethylene, polyurethane.
Diameters: 3, 4, 6, 8 and 10mm.
Fluid: compressed air (for other types of fluid, contact our engineers).
Temperature: -10C to 60C (see data for tubing used).



Swivel Run Tees

Auto-Switches

Auto Switches

SMC AN203-02 Series Silencer

Over 25dB(A) noise reduction.
Space saving
Compact style.

AN203-02 Specification:
Port size: 1/4.
Effective area (mm2): 15.
Fluid: Compressed Air.
Max. operating pressure: 1.0MPa.
Noise reduction: 25dB(A).
Ambient and fluid temperature: 5 to 60C.
Weight: 3g.

Mechanical/Manual Valves

Mechanical/Manual Valves