Blanking Plate Assemblies

For use in situations where valves may be added in future.

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Elbow Connector to Male Taper

Copely Nylon Tubing

NMF Eurlon Series
Eurolon industrial nylon tubing is extruded from polyamides 11 and 12 to precise dimensional tolerances, on machinery utilising the latest technical improvements in extrusion calibration. Eurolon industrial tubing has low moisture absorption when compared with other polyamides, ensuring consistent flexibility over a wide range of temperature and humidity conditions. Eurolon tubing is seamless in construction with a smooth high gloss inner and outer surface. It is light, approximately one ninth the weight of copper and flexible, facilitating ease of installation. It is ideally suited for applications such as fuel lines, oil lines, petrol tank breather sheaths, pneumatic controls, bleed lines and brake controls. Eurolon industrial nylon tubing conforms to S.M.M.T. standard NM7B, 1968 and C2C in dimensions specified in addition to SAEJ844 3A (unreinforced) and 3B (reinforced) types, (3B available by special order). Metric dimensions conform to BS5409 with respect to all technical details. Eurolon type 11 nylon in semi rigid grade meets the requirements of government regulations with regard to materials and articles in contact with food under UK Statutory instrument 1978 No.1927. Eurolon tubing is available for higher temperature applications, with heat resisting additives in both semi rigid and flexible grades, subject to minimum manufacturing quantities. Available in several colours: black, blue, natural, green, red and yellow.

Special features:
Resistant to a wide range of chemicals.
Silicone-free.
Excellent abrasion resistance.
Mirror smooth inner for improved flow.
Made from virgin polymer type 12.
Produced to exacting tolerances.
Supplied in 30 metre coils.

Bosch Rexroth Pneumatic Fittings

Mini cylinder, ISO 6432, series OCT.
Available in a range of piston diameters: 10-25mm
Ports: M5-G 1/8.
Double acting with magnetic piston and cushioning: elastic.
Integrated rear eye, piston rod with external thread.

For further specification on this product please see the attached PDF under the additional information tab.

OCT Series Mini Piston Rod Cylinders

For further specification on this product please see the attached PDF under the additional information tab.

Push-fit Solution for Plumbing & Heating Systems

For use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes Speedfit fittings can be used with copper pipe to BS EN 1057 and Speedfit cross-linked polyethylene (PEX) Barrier Pipe to BS7291. NOT to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standard Speedfit products are designed and manufactured under a fully integrated system assessed by B.S.I. to BS EN ISO9001. They are approved by the Water Regulations Advisory Scheme and BBA. Speedfit PEM' and PKM' fittings and Speedfit barrier pipe are kitemarked to BS7291 Part 1 and 3, Class S. (Licence No. KM39767). Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings. Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight. When used outdoors protect from ultra violet light by lagging or painting. It is recommended that all installations are checked prior to use to determine that a seal has been made.
Working temperatures and pressures: Central Heating: 3.0 bar at 92C. Hot Water: 6.0 bar at 65C. Cold Water: 12.0 bar at 20C.

Tap Connectors

Only requires simple hand tightening for connection to terminal taps.

SMC Pneumatic Fittings

Silencer standard type. Low back pressure.
Noise reduction up to 30dB(A).
Threaded and stem connections.

EBKX-L7 Series Silencers

Series AF

Part of SMC's new modular FRL system. Integral water separator. New super efficient 5um poly-element.

Replacement filter elements and mounting brackets are also available.

B - Bracket
C - Autodrain
D - Autodrain

Air Filters

Push-Fit Pneumatic Fittings

Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer.
Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.
Pressure range: - 0.9 bar min to + 10 bar max.
Temp range: - 20C min to + 70C max.
Tube suitability: nylon, polyurethane.

KQ2H04-01S: Tube O.D. 4mm. R 1/8.
KQ2H04-02S: Tube O.D. 4mm. R 1/4.
KQ2H06-01S: Tube O.D. 4mm. R 1/8.
KQ2H06-02S: Tube O.D. 6mm. R 1/4.
KQ2H06-03S: Tube O.D. 6mm. R 3/8.
KQ2H08-01S: Tube O.D. 8mm. R 1/8.
KQ2H08-02S: Tube O.D. 8mm. R 1/4.
KQ2H08-03S: Tube O.D. 8mm. R 3/8.
KQ2H10-01S: Tube O.D. 10mm. R 1/8.
KQ2H10-02S: Tube O.D. 10mm. R 1/4.
KQ2H10-03S: Tube O.D. 10mm. R 3/8.
KQ2H10-04S: Tube O.D. 10mm. R 1/2.
KQ2H12-02S: Tube O.D. 12mm. R 1/4.
KQ2H12-03S: Tube O.D. 12mm. R 3/8.
KQ2H12-04S: Tube O.D. 12mm. R 1/2.
KQ2H16-03S: Tube O.D. 16mm. R 3/8.
KQ2H16-04S: Tube O.D. 16mm. R 1/2.

One Touch Male Connectors

Camozzi Male/Female Reducer - Parallel

2531
Series 2000 pipe fittings BSP adaptor reducing bush.
Male G1/4 - Female G1/8 thread.

Gates Hydraulic Couplings

Female SAE, Flat Face O-Ring Swivel,
90° Swept Elbow, Heavy Series.