Series S6520

Micro Super-Rapid fittings allow fast connection and disconnection of plastic tube, it can be repeated several times and can be performed using one hand and without the use of tools. The sealing ring (O-Ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. This advantage derives from the simple execution of the internal collet, which can be extracted allowing the replacement of the O-Ring.

General data:
Material body and collet: brass OT nickel-plated O-Ring NBR, seal PTFE, NBR, PA
Threads: M3, M5, M7, G1/8, G1/4.
Pressure: min. -0,8 to max. 16 bar (see tubing).
Tube to connect rilsan: PA 6 - 11 - 12 , polyethylene, polyurethane.
Diameters: 3, 4, 6, 8 and 10mm.
Fluid: compressed air (for other types of fluid, contact our engineers).
Temperature: -10C to 60C (see data for tubing used).



Male Stud Swivel Elbow

Electropneumatically Operated ISO 5599/1 Valves
No. of Positions: 5/2
ISO size: 1
Actuation: Solenoid - Solenoid

No. of Positions: 5/2
ISO size: 2
Actuation: Solenoid - Spring

Pneumatically Operated Valves

Series: 3
Function: 5/2
Port: 1/4
Actuation - Return: Pilot Pilot

Pneumatically Operated Valve - Pilot Pilot

SMC Pneumatic Fittings



MGP Series Compact Guide Cylinder

Possible piping from two directions. Two types of guide rod bearing to accommodate various applications (Slide bearing,
Ball bearing). Auto switches can be mounted.

Compact guide cylinder
Bearing Type: Slide bearing
Bore size: 12mm
Cylinder stroke: 10mm

For further specification on this product please see the attached PDF under the additional information tab.

Quick Fit Pneumatic Fittings

Suitable for vacuum application. Rapid type push on fittings with retaining nut.

Threaded Adaptors

3030 Series

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Connector to Male Parallel

CM2T

Tested with ‘Megacrimp’ fittings to 6,000,000 impulse cycles. Nitrile tube for biodegradable hydraulic fluids. Recommended for high pressure hydraulic applications. High temperature resistance (-40°C to 100°C).
Colour coding for easy selection.

Brass Wing Back Elbows

Suitable for central heating systems Manufactured in DZR Brass.

SMC One-Touch Mini Union Tee

KJT
Use to connect tubes in both 90° directions.
KJT04-00: Tube O.D. 4mm.
KJT06-00: Tube O.D. 6mm.

Camozzi Male Stud Tees

2080
Series 2000 pipe fittings BSPT adaptor male stud tee.
Available in G1/8, G1/4, G3/8 and G1/2 threads.