PCL "100 Series" Airline Coupling Adaptors

Case hardened with hard wearing passivate finish. For use with '100 Series' type couplings.

Male Threaded

G33-7-01 Pressure Gauge

Pressure range: 0 - 0.7MPa.
Port size: R1/8.
Outside diameter: 30mm.

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Inflow Restrictor to Male Taper

Push-fit System - Compressed Air

Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard.
Working Temperature Range
Minimum Working Temperature -20C
Maximum Working Temperature +70C
Working Pressure
Temperature Pressure
+23C 10 Bar
+70C 7 Bar

Nylon Hoses

Rigid unplasticised nylon pipe. Supplied in 3 metre lengths.

Series AR Standard

Part of SMC's new modular FRL system.
Locking handle as standard.
Set pressure range (Mpa): 0.05 - 0.85.

We supply the complete range
of SMC Fluid Power Products.
K = Built-in Check
Valve.
E = Built-in Gauge

Air Regulators

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Elbow Reducer to Stem

Bosch Rexroth Pneumatic Fittings

Rexroth QR1 Series push in pneumatic fittings type are available for inch tubing/NPT threads and metric tubing/ISO-G (BSPP) threads. The user friendly oval release ring allow the push-in fittings to quickly release from the tubing much more easily than traditional round release rings. QR1 fittings come in standard and mini sizes, plus function fittings such as ball valves, check valves, flow control etc. They feature premium materials such as the stainless steel tube locking mechanism and polymer body and release ring.

Rexroth QR1-RAI Series Female Straight Pneumatic Fitting

Standard Metric M5-G Female Straight push fit pneumatic fitting for compressed air hoses: 4 to 16mm diameter.

For further specification on this product please see the attached PDF under the additional information tab.

Rexroth Check-Choke Valve

Series CC01
Push-in fitting check-choke valve.
Diameter: 4mm.

Working pressure min/max: 0,5 bar/10bar.
Ambient temperature min/max: +0°C/+60°C.
Medium temperature min/max: +0°C/+60°C.
Medium: Compressed air.
Flow rate: 65 l/min.
Direction of throttle: 1-2.
Materials:
Housing: Polybutyleneterephthalate.
Flow control screw: Brass, nickel-plated.
Seal: Acrylonitrile Butadiene Rubber.

Kobe? Tailpieces & Threaded Connectors

A comprehensive range designed for use in conjunction with airline couplings in garage and industrial applications. Case hardened with zinc finish.

Male Threaded Tailpieces

For connecting a hose to a female threaded fitting.

Fixing Kits for Filter/Reg & Lub

Fixing kit for assembling Series MC (Kit F)
Size: 3/8 - 1/2