Camozzi Swivel Branch Tees

7432
Super-rapid compact fitting Technopolymer swivel branch Tee with O-ring assembled.
Available in:
4mm tube, G1/8 thread.
4mm tube, M5 thread.
6mm tube, G1/8 thread.
6mm tube, G1/4 thread.
6mm tube, M5 thread.
8mm tube, G1/8 thread.
8mm tube, G1/4 thread.
8mm tube, G3/8 thread.
10mm tube, G1/4 thread.
10mm tube, G3/8 thread.
12mm tube, G1/4” thread.
12mm tube, G3/8” thread.
12mm tube, G1/2” thread.
16mm tube, G1/2” thread.
16mm tube, G3/4” thread.

Bosch Rexroth Pneumatic Fittings

5/2 way valve, series 581 size 1.
Qn1400 l/min, plate connection with pilot valve width of 22mm.
Compressed air connection output: Base plate ISO 5599-1
Electr. Connection: Plug, form B, industry.
Manual override: with detent.

For further specification on this product please see the attached PDF under the additional information tab.

581 Series Size 1 Electro Pneumatically Operated Valves

For further specification on this product please see the attached PDF under the additional information tab.

Kobe? ?Standard? Airline Couplings

The 'Industry Standard' coupling. For use with air tools, garage, industrial air line supplies and test panels. Free air flow rate at 7bar/100PSI: 35 to 42 cfm (990 to 1130ltr/min). Zinc plated all steel construction, finished in hard wearing passivate. Stainless steel springs and balls. Positive single locking action prevents accidental dislocation. For fixed applications - for couplings for trailing hoses see 'Vertex' type below.

Female Threaded

1/4" BSPT.

Camozzi Bulkhead Couplings

6590
Super-rapid fittings for plastic tubes. Push-in fitting bulkhead coupling.
Available in 4mm, 6mm, 8mm, 10mm and 12mm tubes.

Intank Pipe Mounted Suction Filters for Protection of Pumps

Stainless steel wire mesh filter which offers excellent resistance to temperature and corrosive fluids. With its square aperture,
high-flow through rate and relative open area, stainless steel mesh filters experience relatively low pressure drops during filtration.
? Corrosive resistant
? Highest temperature rating offered
? Cleanable in some applications

Camozzi Female Equal Cross Couplings

2033
Series 2000 pipe fittings BSP adaptor female equal cross.
Available in threads G1/8, 1/4 and 3/8.

PCL Tailpieces & Threaded Connectors

A comprehensive range designed for use in conjunction with airline couplings in garage and industrial applications. Case hardened with zinc finish.

Union Nuts

For use in conjunction with coned tailpieces to connect hose to male threaded fittings.

Push-fit Solution for Plumbing & Heating Systems

For use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes Speedfit fittings can be used with copper pipe to BS EN 1057 and Speedfit cross-linked polyethylene (PEX) Barrier Pipe to BS7291. NOT to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standard Speedfit products are designed and manufactured under a fully integrated system assessed by B.S.I. to BS EN ISO9001. They are approved by the Water Regulations Advisory Scheme and BBA. Speedfit PEM' and PKM' fittings and Speedfit barrier pipe are kitemarked to BS7291 Part 1 and 3, Class S. (Licence No. KM39767). Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings. Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight. When used outdoors protect from ultra violet light by lagging or painting. It is recommended that all installations are checked prior to use to determine that a seal has been made.
Working temperatures and pressures: Central Heating: 3.0 bar at 92C. Hot Water: 6.0 bar at 65C. Cold Water: 12.0 bar at 20C.

Washing Machine Tap

15mm x 3/4"

Bracket Assemblies

Assembly includes bracket and mounting screws.

Bracket Assemblies

Kennedy® Air Actuated Spool Valves - KVF

General purpose spool valves. Media Compressed air and compressed gases. Mounting - body ported, manifold or through endcaps.
Materials:
Body & Spool: aluminium.
Seals: nitrile.
Endcaps: Glass filled polyester.
Seal spacers: PPS.