SMC One-Touch Fitting Nipples

KQ2N

KQ2N04-99: Fit dia: 4mm.
KQ2N06-99: Fit dia: 6mm.
KQ2N08-99: Fit dia: 8mm.



Colour: white.

Series 1000 Rapid Fittings for Plastic Tubes

They can be used with rigid PA tubes. A locking nut is provided and can be tightened both manually and with a spanner. The special shape of the guiding cone ensures that the tube cannot be accidentally cut.
General data:
Materials body and nut: nickel-plated brass; O-ring: NBR; thread seals: PTFE, PA, AL
Threads GAS, conical ISO 7 (BSPT) GAS, cylindrical ISO 228 (BSP)

Series 1541 Swivel Elbow Sprint

Pressure Line Filter Elements

The new filter element technology used in Betamicron4, has been specially developed to ensure sensitive components are protected, whilst the filter element has a significantly longer service life providing a high level of cleanliness and long-term stability for your hydraulic or lubrication systems.
Filter size: 0330
Type: D
Filtration micron: 003
Filter series Betamicro 4: BN4HC

SMC One-Touch Plug-In Elbow Connectors

KQ2L
Plug-in elbow. Colour: white.
KQ2L04-99: Tube O.D. 4mm x fit dia 4mm.
KQ2L06-99: Tube O.D. 6mm x fit dia 6mm.
KQ2L08-99: Tube O.D. 8mm x fit dia 8mm.
KQ2L10-99: Tube O.D. 10mm x fit dia 10mm.
KQ2L12-99: Tube O.D. 12mm x fit dia 12mm.

Series 61 Aluminium Profile Cylinders

Double Acting.
Standard DIN/ISO 15552.
Stainless steel piston rod.
Anodised aluminium extrusion cylinder barrel.
Cast aluminium End Blocks.
Stroke min-max lengths: 10-1000mm.
Bore sizes: Ø 32, 40, 50, 63, 80, 100, 125mm.
Operating temperature: 0°C to +80°C (with dry air -20°C to +80°C).
Operating Pressure: 1 to 10 bar.
Speed: 10 to 1000mm/sec (no load).
Connections: Ø 32 – 1/8”, Ø 40, 50 – ¼”, Ø 63, 80 –3/8”, Ø 100, 125 – 1/2”.

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Connector to Male Taper

SMC One-Touch Female Elbow Connections

KQ2
KQ2LF04-01: Tube O.D. 4mm. Thread: RC1/8.
KQ2LF04-01: Tube O.D. 4mm. Thread: RC1/4.
KQ2LF06-01: Tube O.D. 6mm. Thread: RC1/8.
KQ2LF06-02: Tube O.D. 6mm. Thread: RC1/4.
KQ2LF06-03: Tube O.D. 6mm. Thread: RC3/8.
KQ2LF08-01: Tube O.D. 8mm. Thread: RC1/8.
KQ2LF08-02: Tube O.D. 8mm. Thread: RC1/4.
KQ2LF08-03: Tube O.D. 8mm. Thread: RC3/8.



Colour: white.

Copely Polyurethane Tube

CPU Series
Codeflex polyurethane tube is suitable for a wide range of applications demanding a flexible and cut resistant tube in applications such as pneumatic control systems and chemical transfer tubing. Codeflex polyurethane is well suited to applications demanding maximum kink resistance, minimum kink memory. It is suitable for fitting into confined spaces where conventional tubes lacking the above factors would increase fitting time in addition to flow restriction.

Applications:
Pneumatic control systems.
Fuel and lubrication lines.
Chemical transfer tubing.
Special features:
Exceptional abrasion resistance.
Resistance to a wide range of chemicals.
High flexibility.
Silicone-free.
Working pressures:
Nominal working pressure calculated at 23C with a 4.1 safety factor.
Temperatures: -50C/55C (short term use at 85C).
Special note:
The CPU series has been designed and developed to meet the exacting standards of the push fit type of coupling.
Supplied as 30 metre coils.

Copper Compression Fittings

Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark, Prestex ?type A? compression fittings are suitable for mechanically joining copper or stainless steel tube by means of compressing a cone into a tube without the application of heat. The range is designed for use with copper tube to BS EN 1057: 1996 (formerly BS2871: part1 ), BS2871: part 2, or stainless steel tube to BS4127: 1994). Fittings are available in brass, all with brass cap nuts as standard.

Straight Compression Fittings

Straight connectors for use on plain joints.

Auto Shut-off Valve

Connection: 1/4
Type: Electropneumatic