Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Connector to Female Parallel

Push-fit Solution for Plumbing & Heating Systems

For use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes Speedfit fittings can be used with copper pipe to BS EN 1057 and Speedfit cross-linked polyethylene (PEX) Barrier Pipe to BS7291. NOT to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standard Speedfit products are designed and manufactured under a fully integrated system assessed by B.S.I. to BS EN ISO9001. They are approved by the Water Regulations Advisory Scheme and BBA. Speedfit PEM' and PKM' fittings and Speedfit barrier pipe are kitemarked to BS7291 Part 1 and 3, Class S. (Licence No. KM39767). Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings. Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight. When used outdoors protect from ultra violet light by lagging or painting. It is recommended that all installations are checked prior to use to determine that a seal has been made.
Working temperatures and pressures: Central Heating: 3.0 bar at 92C. Hot Water: 6.0 bar at 65C. Cold Water: 12.0 bar at 20C.

Equal Tees

Connects plain pipe end to end and at 90.

Rexroth T-Unions

QR1-RTT Series
2x push-in fitting T-union with external thread.
Available in threads:
G1/8 x 6mm diameter.
G1/8 x 8mm diameter.
G1/4 x 6mm diameter.
G1/4 x 8mm diameter.
G1/4 x 10mm diameter.
G1/4 x 12mm diameter.
G3/8 x 10mm diameter.
G3/8 x 12mm diameter.
G3/8 x 14mm diameter.
G1/2 x 12mm diameter.

Ambient temperature min/max: +0°C/+60°C.
Working pressure min/max: -0.95 bar/10bar
Materials:
Housing: Polybutyleneterephthalate.
Seal: Acrylonitrile Butadiene Rubber.
Tooth lock washer: Stainless steel.
Release ring: Polyoxymethylene.
Release ring holder: Die cast zinc; Brass, nickel-plated.
Thread: Brass, nickel-plated.

SMC Union Y-Connectors

KQ2U
Union Y-connectors. Colour: white.
KQ2U04-00: Tube O.D. 4mm.
KQ2U06-00: Tube O.D. 6mm.
KQ2U08-00: Tube O.D. 8mm.
KQ2U010-00: Tube O.D. 10mm.
KQ2U012-00: Tube O.D. 12mm.
KQ2U016-00: Tube O.D. 16mm.

Tube Cutter with Safety Lock

TK-1
Perpendicular tube cutting with reduced force and safety lock. Used for nylon, soft nylon, polyurethane and other soft plastic tubing.
Size (L x W): 155 x 88mm.
Weight: 140g.

TU Series

Temperature range: -20C to +60C.
29 colours available.
Operating pressure: 0.6Pa.
Prices shown are for 20m coils - 100m coils also available.
Also available in nylon and flame resistant.

Camozzi Female/Female Reducers

2553
Series 2000 pipe fittings BSP adaptor female reducer.
Available in threads:
G1/8 - G1/4 overall length 17mm.
G1/8 - G3/8 overall length 18mm.
G1/4 - G3/8 overall length 19.5mm.
G1/4 - G1/2 overall length 23mm.
G3/8 - G1/2 overall length 24mm.

Series 6000

Equal Tube Elbow Air Fitting

Bracket Assemblies

Assembly includes bracket and mounting screws.

Bracket Assemblies

Camozzi Swivel Branch Tees

S6430
Super-rapid fittings for plastic tubes. Push-in fitting swivel branch Tee.
Available in:
10mm tube - G1/4 thread.
10mm tube - G3/8 thread.
12mm tube - G1/4 thread.
12mm tube - G3/8 thread.
12mm tube - G1/2 thread.