SMC Plug Connectors

KQ2P

KQ2P-04: Fit dia: 4mm.
KQ2P-06: Fit dia: 6mm.
KQ2P-08 Fit dia: 8mm.
KQ2P-10: Fit dia: 10mm.
KQ2P-12: Fit dia: 12mm.



Colour: white.

5 Port Operated Valves

SYA
Modular five port air pilot valves that can be manifold mounted (manifolds supplied separately). Body ported or base mounted

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Elbow Connector

TU Series

Temperature range: -20C to +60C.
29 colours available.
Operating pressure: 0.6Pa.
Prices shown are for 20m coils - 100m coils also available.
Also available in nylon and flame resistant.

Body Ported Manifolds

Suitable valves for these manifolds: SY**20 types.

Elbow Type

Three functions from a single component to minimises installation time and cost. Accepts nylon and polyurethane tubing. Integral one-touch fitting. 4mm - 12mm.

Kennedy® Electronic Auto Drain Valve

Electronic timer for ultimate reliability. Adjustable interval and discharge times. Self cleaning valve needs no maintenance. LED indicators show operational status. Impulse test button. Supplied un-branded with full instructions - ideal for distributors. Includes tamper proof kit. Failure to carry out routine draining of compressed air systems can cause serious damage to 'downstream' components such as valves, cylinders and control systems. The Auto Drain Valve eliminates the risk of this potentially expensive problem by providing regular automatic condensate drainage. A special electronic timer is coupled to a purpose built self cleaning solenoid valve. The complete unit requires only a simple installation procedure. Once fitted the unit can be set with a variety of interval and discharge times to suit the particular compressed air system requirements. The unit is suitable for air, neutral gas and contaminated liquid discharge.

Specifications:
Electronic Timer:
Power on LED.
Valve open LED.
Interval time: 0.5 to 45 min.
Discharge time: 0.5 to 10 sec.
Solenoid valve: 0 to 16 bar.
Function: 2/2 NC.
Port connections: G3/8.
Main pressure range: 0-16 bar max.
Filtration: Strainer recommended.
Temperature range: Ambient -10°C to 50°C, Media -10°C to 140°C.
Lubrication: Not required.
Media: Air, gases, non-corrosive liquids.
Timer and solenoid valve assembly.
Electrical data: AC 220V, 50Hz,19W, AC 110V, 50Hz, 28W. Insulation: Class H 180C.
Protection: IP65 (with connector).
Temperature range: -10°C to 140°C.
Materials: Solenoid valve.
Tube and plunger: stainless steel.
Spring: stainless steel.
Body: brass.
Seals: Buna.

Push-fit System - Compressed Air

Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard.
Working Temperature Range
Minimum Working Temperature -20C
Maximum Working Temperature +70C
Working Pressure
Temperature Pressure
+23C 10 Bar
+70C 7 Bar

Reducing Tee

Connects plain pipe end to end and smaller diameter pipe at 90.

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Outflow Restrictor to Male Taper

Gates Hydraulic Couplings

Female JIC Swivel. 37° Inverted Cone.