Engineers Rules

All rustless rules up to and including 600mm/24" have an anti-glare, easy to read finish with permanent black figures and graduations. Rustless rules over 600mm/24" are standard rustless steel. Metric graduations conform to BS 4372 : 1968.

Pattern 64R

Round end - rigid blade. 2 sides - 4 edges. Metric - subdivided to mm, 1/2mm, figured every 10mm. Inch - subdivided to inches, 16ths, 32nds, 64ths, 10ths, 20ths, 50ths, 100ths. 1-35-403 Blade thickness 2.0mm. 0-35-406 Blade thickness 1.0mm

Senator® Carpenters' Rules

Extremely lightweight extrusion made from anodised aluminium, hardened and lacquered. Graduated mm/1/8ths. Supplied in clear plastic wallets.

Kennedy® Drill Gauges

Manufactured from hardened steel with a satin finish. An ideal way to quickly measure the diameter of drills and
steel wire.

External Spring Calipers

Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting screw is mounted across the legs and is used for setting the distance between the two points. Calipers are used for taking internal and external measurements, also for comparing distances or sizes.

Kennedy® Engineers' Steel Rules

Finest quality spring tempered rustless steel. Satin chrome. Anti-glare finish with permanent black figures and graduations. Extremely easy to read. EEC Class one accuracy: +/- 0.2mm full scale. Constant at 20°C.

Round End - Flexible Blade

Spring tempered flexible steel blades. 12mm blade width. With hanging hole.

Oxford? Precision Engineers' Hand Tools

Manufactured from hardened steel that has been precisely ground to produce parallel edges so that the square has an exact right angle on both the inside and outside of the stock and blade, to ensure accuracy. Conforms to BS939 Grade B.

150mm (6") Engineer's Steel Square

Firm Joint Calipers

Manufactured from high quality steel, with a polished finish. Consisting of two legs which are held together by a large nut and screw to provide a firm friction joint. Each Firm Joint Caliper has an adjustable ground point which can be retracted for storage and the other leg is angled at the tip. The legs can be reversed, so the tip turns inwards or outwards. Firm joint calipers are used for scribing arcs and parallel lines by using the edge of the workpiece as a guide, and are also used for measuring from the centre point of a component.

Adjustable Point

Oxford? Precision Engineers' Hand Tools

These engineer's steel squares from OxfordTM Precision are manufactured from hardened steel that has been precisely ground to produce parallel edges so that the square has an exact right angle on both the inside and outside of the stock and blade, to ensure accuracy. Conforms to BS939 Grade B.

300mm (12") Engineers' Steel Square

Metric Feeler Gauge

19 blade feeler gauge with rounded ends. Each blade is etched with size for ease of use.
Number of blades: 19

804.SL

Blade thickness in 1/100mm: 30-35-40-50-60-70-80-90-100
Blade length: 250mm

Spring Dividers

Manufactured from high quality polished steel. Ground finished points, a fine adjusting screw is mounted across the legs for setting the distance between the two points. A circular spring bow joins the legs, with a knurled extension attached for use when pivoting the dividers. Dividers are used for scribing arcs and circles, a light centre punch mark on the work keeps the pivot leg in the centre while marking.