Tweezer Set

For workshop and home use. Cross pattern types are self closing and open only under applied pressure. High quality finish supplied singly or as a 6 piece set.



Contents:
1x Sharp nose - 115mm Overall length
1x Needle Nose - 115mm Overall leangth
1x Flat Blade Cross - 170mm Overall length
1x Bent Nose - 145mm Overall length
1x Flat Blade - 120mm Overall length
1x Sharp Nose - Cross Pattern - 115mm Overall length

Firm Joint Calipers

Manufactured from high quality steel, with a polished finish. Consisting of two legs which are held together by a large nut and screw to provide a firm friction joint. This firm joint caliper has an adjustable ground point which can be retracted for storage and the other leg is angled at the tip. The legs can be reversed, so the tip turns inwards or outwards. Firm joint calipers are used for scribing arcs and parallel lines by using the edge of the workpiece as a guide, and are also used for measuring from the centre point of a component.

Adjustable Point & Spur

Spring Dividers

Manufactured from high quality polished steel. Ground finished points, a fine adjusting screw is mounted across the legs for setting the distance between the two points. A circular spring bow joins the legs, with a knurled extension attached for use when pivoting the dividers. Dividers are used for scribing arcs and circles, a light centre punch mark on the work keeps the pivot leg in the centre while marking.

Tweezers

For workshop and home use. Cross pattern types are self closing and open only under applied pressure. High quality finish supplied singly or as a 6 piece set.

Kennedy® Engineers' Steel Rules

Finest quality spring tempered rustless steel. Satin chrome. Anti-glare finish with permanent black figures and graduations. Extremely easy to read. EEC Class one accuracy: +/- 0.2mm full scale. Constant at 20°C.

Round End - Rigid Blade

Spring tempered rigid steel blades. 150mm/6" 19mm blade width. Other lengths 25mm blade width. With hanging hole.

Kennedy® Engineers' Squares

Manufactured from hardened and tempered steel. The edges are ground parallel to give the square an exact right angle on both the inside and outside of the stock and blade.
Supplied in a robust case.

225mm (9") Engineers' Square

External Spring Calipers

Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting screw is mounted across the legs and is used for setting the distance between the two points. Calipers are used for taking internal and external measurements, also for comparing distances or sizes.

Kennedy® Engineers' Squares

Manufactured from hardened and tempered steel. The edges are ground parallel to give the square an exact right angle on both the inside and outside of the stock and blade.
Supplied in a robust case.

150mm (6") Engineers' Square

Protractor Type Depth & Angle Gauge

Graduations 0 - 180 in both directions. 1/2" resolution.

Plain Type Depth Gauge

Top and bottom faces accurately ground. The body can be reversed on the rule.