Tweezers

For workshop and home use. Cross pattern types are self closing and open only under applied pressure. High quality finish supplied singly or as a 6 piece set.

Tweezers

For workshop and home use. Cross pattern types are self closing and open only under applied pressure. High quality finish supplied singly or as a 6 piece set.

Radius Gauges

Manufactured from hardened and polished steel, the blades are precision milled for optimum accuracy when measuring internal and external radii. Enclosed in a steel case.

Firm Joint Calipers

Manufactured from high quality steel, with a polished finish. Consisting of two legs which are held together by a large nut and screw to provide a firm friction joint. This firm joint caliper has an adjustable ground point which can be retracted for storage and the other leg is angled at the tip. The legs can be reversed, so the tip turns inwards or outwards. Firm joint calipers are used for scribing arcs and parallel lines by using the edge of the workpiece as a guide, and are also used for measuring from the centre point of a component.

Adjustable Point & Spur

Kennedy® Tapered Gauges

These are called taper gauges only because of their shape. They do not measure tapers they are ideally suited for the rapid accurate checking of the inside diameters of tubing, slot widths, hole sizes, setting calipers etc. Manufactured from spring tempered stainless steel. 0.1mm increments. Rustless. Constant at 20°C. Satin Chrome anti glare finish. Permanent black figures and graduations.

Metric Feeler Gauge

19 blade feeler gauge with rounded ends. Each blade is etched with size for ease of use.
Number of blades: 19

804

Blade thickness in 1/100mm: 4-5-6-7-8-9-10-15-20-25-30
Blade length: 90mm

Senator® Carpenters' Rules

Extremely lightweight extrusion made from anodised aluminium, hardened and lacquered. Graduated mm/1/8ths. Supplied in clear plastic wallets.

Kennedy® Standard Wire Gauges

Manufactured from high grade tool steel with satin brushed finish. Each slot is marked with the nominal size. Two part pivoting space saving design.

Protractor Type Depth & Angle Gauge

Graduations 0 - 180 in both directions. 1/2" resolution.

Kennedy® Engineers' Steel Rules

Finest quality spring tempered rustless steel. Satin chrome. Anti-glare finish with permanent black figures and graduations. Extremely easy to read. EEC Class one accuracy: +/- 0.2mm full scale. Constant at 20°C.

Round End - Rigid Blade

Spring tempered rigid steel blades. 150mm/6" 19mm blade width. Other lengths 25mm blade width. With hanging hole.