Line of Chords & Circumference

Manufactured from hardened steel, polished and ground finish, precision etched for accurate measurement. The rules can be used to measure diameters up to 600mm (24") and the equivalent circumference can be read directly from the rule, totally eliminating the need for calculating the circumference. The line of chords scale on the rule, when used in conjunction with dividers allows angles to be set or measured.

Kennedy® Engineers' Squares

Manufactured from hardened and tempered steel. The edges are ground parallel to give the square an exact right angle on both the inside and outside of the stock and blade.
Supplied in a robust case.

225mm (9") Engineers' Square

Plain Type Depth Gauge

Top and bottom faces accurately ground. The body can be reversed on the rule.

Spring Dividers

Manufactured from high quality polished steel. Ground finished points, a fine adjusting screw is mounted across the legs for setting the distance between the two points. A circular spring bow joins the legs, with a knurled extension attached for use when pivoting the dividers. Dividers are used for scribing arcs and circles, a light centre punch mark on the work keeps the pivot leg in the centre while marking.

Kennedy® Engineers' Rule, Round End - Pocket Type

Spring tempered stainless steel blades. 13mm blade width with sliding pocket clip which can be used as a depth gauge slide. Reverse side is marked with 64th to mm conversion table. 12mm blade width. Can also be used as a depth gauge. Flexible. Round end. Rustless.
EEC Class one accuracy (+/-0.2mm at 20°C). Satin chrome anti glare finish. Permanent black figures and graduations. Hanging hole.

Kennedy® Standard Wire Gauges

Manufactured from high grade tool steel with satin brushed finish. Each slot is marked with the nominal size. Two part pivoting space saving design.

Internal Spring Calipers

Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting screw is mounted across the legs and is used for setting the distance between the two points. Calipers are used for taking internal and external measurements, also for comparing distances or sizes.

Kennedy® Engineers' Steel Rules

Finest quality spring tempered rustless steel. Satin chrome. Anti-glare finish with permanent black figures and graduations. Extremely easy to read. EEC Class one accuracy: +/- 0.2mm full scale. Constant at 20°C.

Round End - Rigid Blade

Spring tempered rigid steel blades. 150mm/6" 19mm blade width. Other lengths 25mm blade width. With hanging hole.