35 - 200mm Valve Spring Compressor

Fully adjustable valve spring compressor for use on large diesel engines. A unique 'direct action' compressor lever gives improved visibility and ease of use in areas of difficult access. Manufactured from heavy duty steel with all riveted joints and a slip-resistant rubber handle.

Specifications:
Restricted access adaptors: 25mm, 30mm.
Jaw opening: min 35mm, max 200mm.
Throat clearance: 250mm.

Packaging dimension (W x H x D): 395 x 285 x 40mm.

Gross weight: 2.5kg.

Nut Splitters

Mechanical drop forged, hardened and tempered plated steel. Ideal for releasing seized/damaged nuts etc.

Sykes-Pickavant Coil Spring Compressor

For use on Macpherson struts to remove coil springs safely and easily. Overall length: 365mm.

Kennedy 10 Tonne Body Repair Kit

Used for clamping, pulling, bending, straightening, spreading and lifting operations. Snaps together quickly. Heavy duty hand pump has automatic overload feature. Tough, blow moulded case. Strong flexible hose with spring guards at both ends. Hydraulic hand pump, ram and spreader.

Kennedy Hydraulic Bottle and Trolley Jacks

Kennedy Hydraulic bottle jacks have large cast iron bases with a steel housing and lift cylinder, that has an adjustable notched load saddle. Each jack is fitted with an overload protection valve. Two piece pumping handle also operates hydraulic release.

For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

GS and TUV approved.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Hydraulic Bottle Jacks

Model number: B1246
Maximum load: 12 Metric Tonnes.
Height range: 230-465mm Min/Max.
Max saddle adjustment: 80mm.
Weight: 7.50kg.

(Load ratings are Metric Tonnes i.e. 1 tonne = 1,000kg).
Supplied with spare seals.

Spares

To suit hand pumps

Repair kit

Kennedy Spring Compressor Set

Hardened steel screws & cast steel claws. 2 legged. Central hexagonal drive with wrap over coil claws. Can be reversed for spreading applications. Use with 21mm (3/16") AF spanner. Maximum jaw opening: 250mm.

Repair Kit for Kennedy Hydraulic Pull Ram

Contains replacement O-ring seals for KEN-503-7180K.



To suit the the Kennedy Hydraulic Pull Ram (KEN-503-7180K) illustrated.

Battery Tester

For testing the charge state of lead acid batteries by measuring the specific gravity of battery acid. Simple to use hydrometer type instrument with glass tube & float, rubber syphon and probe.

Spot Weld Remover

Suitable for cutting holes in steel metal, steel, plastic and brass. The hardened steel cutter is reversible increasing tool life. adjusting the spring loaded centre point, screw accurately controls the depth of cut. Allowing the top to be removed whilst leaving the lower panel in place. Maximum rated operating speed 900rpm.