Sykes-Pickavant Adjustable Oil Filter Remover

Mild steel shank with 1" external Hex and 1/2" internal square drive. Heavy duty leaf link chain suitable for removing large oil, fuel and water filters on commercial vehicles, plant machinery etc.

Chain Type Oil Filter Remover

Telescopic Transmission Jack

Ideal for car and light commercial transmission removal and installation. Fully adjustable universal rotary saddle with adjustable corner brackets and safety chains. Foot operated pump and release valve leaves both hands free to manoeuvre transmission. Wide base with four 3" dia. swivel-type ball bearing castors providing stability and easy manoeuvring. Two-stage flash chromed rams inhibit rust from entering the hydraulic system. Lifts from 875mm to 1800mm.
Capacity: 1/2 Ton.
Ram Extensions: 2.
Minimum Saddle Height: 875mm.
Maximum Saddle Height: 1800mm.
Saddle Size: 680x810mm.
Chain Length: 95mm.
Saddle Tilt Forward: 24".
Saddle Tilt Back: 19".
Saddle Tilt Side: plus/minus 20".
Saddle Return Weight: 15.8kg (35lbs).
Base: 95 x 805mm.
Weight: 68.5kg.

Diesel Compression Tester CV Kit

Suitable for use on both direct and indirect diesel injected commercial, marine and industrial engines. Contents: \t5/16 x 24 UNF internal & 1/2 x 20 UNF external threaded centre pillar. 20.5 x 30, 23.6 x 32, 23.6 x 41 end adaptors. Replacement seal and washer kit. Two clamp plates. 90 elbow. Gauge diameter: 100mm. Scale: 0 - 60 bar.

Kennedy Hydraulic Bottle and Trolley Jacks

Kennedy Hydraulic bottle jacks have large cast iron bases with a steel housing and lift cylinder, that has an adjustable notched load saddle. Each jack is fitted with an overload protection valve. Two piece pumping handle also operates hydraulic release.

For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

GS and TUV approved.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Hydraulic Bottle Jacks

Model number: B3047
Maximum load: 30 Metric Tonnes.
Height range: 285 to 475mm Min/Max.
Max saddle adjustment: n/a
Weight: 23.20Kg.

(Load ratings are Metric Tonnes i.e. 1 tonne = 1,000kg).
Supplied with spare seals.

Trim Pin Remover

Designed for removing vehicle trim panels and upholstery. Also used for replacing door locks, window mechanisms and general bodywork repairs.

Universal Sprocket Locking Device

For twin cam and quad cam engines. A unique adjustable tool which locks into the teeth of sprockets to retain them on timing marks during timing belt replacement/engine overhaul. 'Act as a second pair of hands' . . . helping to retain cam sprockets whilst you are positioning the timing belt around crank, injection pump or tensioner. Incorporates 'variable pitch' adjustable arms to cover various sprocket dismeters and tooth pitch. Design feature also covers 'flanged sprocket' applications. Also suitable for 'locking' between cam and diesel injection pump sprockets on certain diesel engine applications.

AST4500 Multi-lock II

Brake Spring Cup Washer Tool

Removes and replaces T-slot anti-rattle spring washers found in drum brake assemblies. Hardened and tempered carbon steel shank and cup with oxidised finish for protection against corrosion, bevelled and notched cup fits 16 - 22mm (5/8" - 7/8") diameter. Impact resistant square section handle for secure grip even when greasy.
Overall length: 152mm (6").

Vacuum Testing & Brake Bleeding Kit

Vacuum testing kit that helps to locate and identify faults on cars, motorcycles and commercial vehicles. Supplied in robust blow moulded case.



Maximum vacuum: 550mm Hg.
Reservoir capacity: 150ml.

Contents: serviceable metal bodied vacuum pump, reservoir jar, transfer lid, storage lid, 4x lengths of 6mm ID tubing, 1x length of 4mm ID tubing adaptor. Set of brake bleeding adaptors, rubber cup adaptor. Dimensions (W x H x D): 350 x 305 x 80mm. Gross weight: 1.5kg.

Body Repair Kit

Used for clamping, pulling, bending, straightening, spreading and lifting operations. Snaps together quickly. Heavy duty hand pump has automatic overload feature. Tough, blow moulded case.
Strong flexible hose with spring guards at both ends.
Hydraulic hand pump, ram and spreader.

Spares

Blow Moulded Case for 4 Tonne Kit. N.B. contents not included.

Ratcheting Hose Pinch Pliers

For clamping flexible brake lines, fuel lines, vacuum hose and other fluid lines. Allows servicing to be carried out without the need for system draining. Heavy duty serrated jaw edges provide excellent clamping whilst avoiding damage to hoses. Jaws pivot and self level to ensure parallel clamping.
Fine-adjusting ratchet action allows hoses to be fully or partly closed. Cocking mechanism holds pivot jaws firmly in position. All steel construction with corrosion resistant finish.



200mm (8") Long.
For hoses up to 22mm diameter. Shorter handle length allows access in confined spaces.