Creeper Board with Magnetic Trays

High-impact moulded plastic creeper board let’s you work under vehicles with ease. Low profile design to provide greater clearance. Padded headrest with removable magnetic tool trays and 6 x75mm PVC coated caster wheels. Capacity: 113kg (250lbs). Dimensions: 1020(L) x 475(W) x 120(H)mm. Weight: 5kg.

KMC01

55 - 175mm Valve Spring Compressor

Fully adjustable valve spring compressor for use on multi-valve petrol and diesel engines with deep seated valves. Universal model with unique dual-cam action, parallel lift and automatic locking reversible jaw/adaptor, suitable for general use on a wide range of OHC, OHV and CVH engines. A unique 'direct action' compressor lever gives improved visibility and ease of use in areas of difficult access. Manufactured from heavy duty steel with all riveted joints and a slip resistant rubber handles.
Specifications:
Restricted access adaptors: 25mm, 30mm.
Jaw opening: min 55mm, max 175mm.
Throat clearance: 165mm.

Packaging dimensions (W x H x D): 430 x 205 x 40mm.

Gross weight: 2.2kg.

Adamy 12/24V Battery Charger

For heavy duty commercial and garage use, with normal, fast and starter boost modes. Built-in voltmeter. Current: 18amp. Battery size: 180Ah.

Cylinder Hone

For honing of brake cylinders and piston bores with capacities between 19 - 68mm. Self aligning flexible shaft and leg assembly for smooth operation at all speeds. Honing diameter and pressure is adjusted via a simple, spring and cone mechanism. Suitable for use with a variable speed electric or air drill and fits into all three jaw chucks. Supplied complete with a fine grade stone set. Overall length 200mm.
For storage purpose legs are retained in position by a triangular clip. This can be removed using long nose pliers. or tweezers and should be retained for futher use. Replacement stone sets available.

Use brake fluid for cutting lubricant.

Packaging dimensions (W x H x D): 70 x 297 x 30mm.

Gross weight: 105g.

Lever operated vacuums

For use in hand lift applications only. Multiple vacuums used on a single load can only improve handling. If using more than one vacuum tool the ratio of maximum lift capacity does not increase. To lift heavier weights a larger vacuum must be used. All are fitted with a rubber suction which will not damage contact surface during the lifting action. For use on glass, tiles, plastic or other smooth surfaced non-porous material and can also be used for pulling out dents. Hand lift only, must not be used in conjunction with mechanical lifting equipment.



3 x 120mm diameter rubber suction cups. Maximum lift: 110kg.

Senator® Oil Filter Wrench

Articulated filter wrench with swivel action tightener. Suitable for oil filters with limited access. Capacity: 75-110mm.

Seal Repair Kit

To suit the Kennedy Hydraulic Bench Press (KEN-985-5000K) illustrated.

Valve Grinders

For grinding and lapping valves. Solid wood handle with rubber suction cup for firm positive grip. Overall length: 224mm

Oil Filter Remover

Die cast screw with non stretch steel band. The tool is looped over the filter and tightened, once the filter is gripped firmly it can be removed. Suitable for one handed use in areas of confined access.

Steel Loop Oil Filter Removers

Body Repair Kit Spares

Spares for hydraulic hand pumps

Extension Tubes

Long Extension Tube for collision repair kits