Spare Tips

To suit the T-Handle Circlip Tool

Diesel Injector removal set Bosch/Delphi - 4 piece

Specifically designed for removing Delphi/Bosch injectors using 5/8” slide hammer.
Set of three adaptors and a special tool for removing the internal part of Bosch injectors which can be used with an air tool to loosen the injectors through vibration.

Kennedy Automotive Tyre Pump

The Kennedy ACP300 air compressor tyre inflator is easy to use just plug into your car cigarette lighter for power; slip the universal adaptor over the tyre valve, lock in place with the thumb latch and you are ready to inflate, the pressure is clearly displayed on the integral air pressure gauge. Suitable for inflating tyres, airbeds, boats and sports equipment fast and easily.

ACP300 12V Portable Mini Air Pump

The Kennedy ACP300 air compressor tyre inflator is supplied with a 3m cable, a 12V car cigarette lighter plug, 600mm air hose, 3 interchangeable adaptor nozzles and adaptors. The dual air pressure gauge can be read in both lb/in2 & kg/cm2.

Caution: Use with care. Do not exceed recommended pressure at any time or leave unattended while the unit is running. Allow to cool down after 15 minutes of continuous operation. When inflating balls, air mattresses and other soft inflatable material items, etc. avoid excessive pressure. (Note: Soft inflatables may not have pressure ratings, these should only be inflated until they are firm to touch - do not over inflate.)

Kennedy Bottle and Trolley Jacks

Kennedy trolley jacks have strong; robust steel chassis?s to provide stability when under load. Heavy duty fixed direction casters and swivel castors ensure easy positioning under the vehicle prior to lifting. The long reach single piece pump handle with comfort rubber grip is to rapidly raise and lower the load arm and the vehicle. A Safety overload protection valve prevents overload damage to hydraulic mechanism. Integral carry handle.

GS and TUV approved.

For use on a firm level surfaces.
DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

2 Tonne Quick Lift Trolley Jack

Model number: T2.249
Maximum load: 2 1/4 tonnes
Dimensions (L x W x H: 695 x 344 x 180mm)
Minimum height: 145mm
Maximum height: 495mm
Weight: 36.5kg

(Load ratings are Metric Tonnes i.e. 1 tonne 1,000kg).

Kennedy Automotive Maintenance

The Kennedy AFT 001 anti freeze tester is suitable for use with ethylene glycol or methanol type anti-freezes. The indicator shows lowest temperature at which the cooling system is protected against freezing. Tough glass tube construction with an easy to read scale. Suitable for use on hot or cold engines.

AFT001 Anti Freeze Tester

Kennedy Bottle and Trolley Jacks

The Kennedy T349 Instant lift 3 tonne trolley jack is capable in one stroke of the foot pedal of raising the 120mm dia load saddle, up to the jack point of the vehicle prior to lifting, this saves time. The frame of the T349 is constructed from heavy gauge steel with heavy-duty castors (swivel type at rear) to ensure that the trolley jack is stable under load. Automatic safety overload protection. Supplied with two-piece 1mtr handle.

GS and TUV approved.

For use on a firm level surfaces.
DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

2 Tonne Quick Lift Trolley Jack

Model number: T349 Instant Lift.
Maximum load: 3 tonne.
Dimensions (L x W x H): 680 x 340 x 170mm.
Minimum height: 145mm.
Maximum height: 490mm.


(Load ratings are Metric Tonnes i.e. 1 tonne 1,000kg).

Panel Beating Dolly

Manufactured from drop forged medium carbon steel (SAE/AISI 1055). Heat-treated with a polished mirror finish.

Heel Dolly

For general reshaping of contoured panels,raising low spots and general panel beating.

Kennedy Specialist Automotive Tools

For the removal of diesel injection pumps from the following engines:

Landrover Freelander (Td4) and Rover 75 2.0d (M47R) engines.

DPP010 Diesel Injection Pump Puller

Spares

To suit hand pumps

Connection Hose

Kennedy Inspection Lamp with NI-MH battery

Designed for the professional, with heavy duty rubberised handle, wire protection cage with integral hook and 4.8m of cable. Accepts screw fitting bulbs up to 60W (bulb not supplied). Fitted with a BS approved plug.

Lead Lamp 240V Wire Cage