Kennedy Fuel Container

Suitable for transporting and storage of Petroleum Spirit and Diesel. UN approved, conform with S.I. 1982/630 Petroleum Spirit Plastic Container Regulations 1982.

5 Litre Fuel Container

Green for unleaded/lead free fuel.

Standard 6 to 12V Circuit Tester

Suitable for use with power on. For 6 & 12V automotive systems only. Locates shorts, earth & open circuits Probe length 45mm. 1m lead Super sharp tempered steel probe to test through wire insulation.



Super sharp tempered steel probe circuit tester to test through wire insulation when power is switched on. Tests 6 & 12V automotive systems only, locates earth, short and open circuits. Tester is fitted with a 1m lead for convenience, 45mm probe and a strong transparent plastic handle.

7 Piece Panel Beating Set

A comprehensive panel beating set containing: 1 x 12oz shrinking hammer.1 x 12oz flat faced bumping hammer. 1 x 10oz round finishing pick.1 each: curved 1.2kg, utility 1.2kg, heel and toe dolly.The hammerheads are manufactured from forged high carbon steel and then ground and polished on the faces and cheeks to a mirror finish. The hammer shafts are manufactured from solid hickory, with an octagonal cross section for improved grip and control when in use. The dollies are manufactured from drop forged medium carbon steel (SAE/AISI 1055) then heat treated and polished to a high mirror finish. Each one is laser etched for easy identification.Supplied in an impact resistant case that prevents the hammers and dollies clashing together and damaging the high polish finish, whilst in transit.

What "Practical Classics" magazine say..."Best Buy"

"Full house to this excellent value set. The four dollies are beautifully finished and profiled, and are a good usable weight. The hammers are also superb, combining decent weight, well shaped shafts and good length. The faces are big enough for effective planishing too. Final plus point is the moulded case, which prevents the contents bashing together."

Kennedy Ratcheting Axle Stands

Suitable for supporting raised vehicles or equipment. Wide angled base, stamped and welded steel frame with solid steel control lever & protective red enamel coating. 10-position ratchet design that automatically locks when raised. Sold as pairs.

6 Tonnes Ratcheting Axle Stands (Pair)

6 Tonnes safe working load per stand (12 tonnes per pair).

Pneumatic Brake & Clutch Bleeder

PBB100
Single man operated pneumatic bleeder which simplifies the bleeding of hydraulic fluid in vehicle clutches and brake systems, also used for the collection of other non-corrosive fluid spillage.
Has a 1ltr container with a 1/4 " NPT connection, operates from 90-145psi (6-10bar) air pressure with an air compsumption rate of 180ltr/min an extraction rate of 1.6ltr/min and vacuum (maximum) 550mm HG. Handles non-flammable liquids between 0 & 80C.

Viscous Hub Spanners

For the removal of thermo, viscous fan hubs. Cranked for easy access. Suitable for most makes of car.

Kennedy Air Line Tyre Inflators

This push-on type tyre inflator is robust and has a dial type pressure gauge reading from up to a maximum of 170 psi. The pressure gauge is protected from accidental damage by a rubber shock guard. Heavy-duty corrosion resistant body with steel operating lever, brass fittings and anti-shock rubber guard. 300psi rated fibre reinforced rubber hose. Accuracy conforms to EC Directive 86/217/EEC. Reading scale 2psi/10kPa (0.1 bar). Inflation range: 170psi/1200kPa (12 bar).

Heavy-Duty Dial Type Tyre Inflator

Cylinder Hone Stones

Replacement cylinder honing stones 29 x 4.5mm, to suit Kennedy cylinder hones KEN5032940K and set KEN5032930K. Also compatible with most other leading brands. Pack of 3.
Packaging dimensions: (W x H x D): 89 x 100 x 20mm
Gross weight: 22g

Spark Plug Brushes

Set of three: nylon, brass and stainless steel.

Body Repair Kit

Used for clamping, pulling, bending, straightening, spreading and lifting operations. Snaps together quickly. Heavy duty hand pump has automatic overload feature. Tough, blow moulded case.
Strong flexible hose with spring guards at both ends.
Hydraulic hand pump, ram and spreader.

Spares

Spreader Ram
1/2 ton capacity.
1/4" NPT thread size.