Cast Iron Electrodes S-NFC

A Graphite coated Iron-Nickel alloy electrode for high strength jointing of cast iron and cold welding of cast iron, it deposits 95%Ni + 2%Fe weld metal.
Can be used for repairing broken cast iron, joining of cast iron to steel and building up worn parts.
Meets the following standards:
AWS A 5.15 E Ni-C1
Din 8573 E Ni BG 11

4.0mm

Recommended Amperage: 145A

SWP Drying Ovens

SWP drying ovens - the efficiency of welding electrodes can be seriously impaired if the electrode coating is exposed to a damp environment. Dampness can cause water to be generated in the arc shield, which could adversely effect the running quality of the electrode by promoting excessive spatter and ultimately the quality of the weld by creating porosity and piping. SWP offer you a range of drying ovens to suit many locations and needs.

1126 110V High Temperature Baking Oven 3KW (0C-500C)

The high temperature baking oven is robustly made.Solid state controls give accurate temperature control over a range of 0 - 500C. Visual indication of temperature is given by means of a digital display on the temperature controller. Temperature settings are digitally set. Chart recorder optional.
Voltage: 110V.
Load: 3000W.
Dimensions (W x D x H):
Internal: 470 x 470 x 470mm.
External: 600 x 685 x 760mm.
Oven capacity: 93kg.
Oven weight: 77kg.

Murex All Positional Welding Electrodes

One of the most versatile electrodes available, suitable for Vertical, Overhead and Downhand welding. Available in 2.5, 3.2, 4.0, 5.0 and 6mm.

Vodex 6013

High quality rutile coated, all positional rods. Applications: for steel plate and strip including structural steels and pipe work, especially under site conditions.
N.B. suitable for AC (50V minimum open circuit) and DC plus/minus.

Gas & Tig Welding Rods

General purpose steel rod for high grade oxy-acetylene welding steel and wrought iron. Widely used for automobile, heating and ventilation industries. No Flux required. Melts at 1490C.

Sifsteel No.11 Copper Coated Mild Steel - BS1453 A1

Cast Iron Electrodes S-NFC

A Graphite coated Iron-Nickel alloy electrode for high strength jointing of cast iron and cold welding of cast iron, it deposits 95%Ni + 2%Fe weld metal.
Can be used for repairing broken cast iron, joining of cast iron to steel and building up worn parts.
Meets the following standards:
AWS A 5.15 E Ni-C1
Din 8573 E Ni BG 11

2.5mm

Recommended Amperage: 70A

Aluminium Tig/Gas Welding Rods

Sifalumin No.15 - 5% Silicon
BS 2901 : Part 4 : 1990 4043A. (Tig rods). AWS A/SFA 5-10-88: ER 4043.



Suitable for welding a wide range of cast and wrought aluminium alloys (not magnesium alloys). Particularly suited to Tig welding (with argon shielding gas). Use with aluminium flux for oxy-acetylene welding.

Aluminium Tig/Gas Welding Rods

BS 2901 : Part 2 : 1990 18/8/3 Mo - 316L AWS A/SFA 5-9-93.
Low carbon austenitic filler rod for welding steels of similar composition (19% Cr, 12% Ni, 3% Mo). Use with argon shielding gas or argon/5% hydrogen.

Sifsteel Stainless 308L

Aluminium Tig/Gas Welding Rods

Sifalumin No.15 - 5% Silicon
BS 2901 : Part 4 : 1990 4043A. (Tig rods). AWS A/SFA 5-10-88: ER 4043.



Suitable for welding a wide range of cast and wrought aluminium alloys (not magnesium alloys). Particularly suited to Tig welding (with argon shielding gas). Use with aluminium flux for oxy-acetylene welding.

Aluminium Tig/Gas Welding Rods

BS 2901 : Part 2 : 1990 18/8/3 Mo - 316L AWS A/SFA 5-9-93.
Low carbon austenitic filler rod for welding steels of similar composition (19% Cr, 12% Ni, 3% Mo). Use with argon shielding gas or argon/5% hydrogen.

Sifsteel Stainless 316L

SWP Drying Ovens

SWP drying ovens - the efficiency of welding electrodes can be seriously impaired if the electrode coating is exposed to a damp environment. Dampness can cause water to be generated in the arc shield, which could adversely effect the running quality of the electrode by promoting excessive spatter and ultimately the quality of the weld by creating porosity and piping. SWP offer you a range of drying ovens to suit many locations and needs.

1141 Dual Voltage 110/240V Electrode Quiver

The heated electrode quiver is designed for use on installations with a 110 volt or 240 volt supply (3 models available: 110V, 240V and Dual 110/240V). The quiver will maintain an even temperature of 100C approx. dependent on the amount of electrodes stored.
Voltage: 110, 240V or Dual 110/240V.
Load: 150W.
Overall dimensions:
(W x D x H)
120 x 500 x 110mm.

Oven capacity: 9kg.
Oven weight: 3kg.