Sif Aluminium Mig Wire Reels

For use with Ar or Ar-He shielding gas. Precision layer wound. Made to BS 2901/1 : 1983 4043A & AWS A5.10.92 ER 4043. For wrought and cast alloys with up to 7% silicon content. Available as 1.0mm and 1.2mm. 6.5kg reels.

SifMig 4043 Aluminium Mig Wire Reel

Aluminium Tig/Gas Welding Rods

Saffire aluminium 5% silicon & magnesium. BS 2901:Part 4 : 1990 4043A (Tig Rods). BS 1453:1972(1987) 4043A (Gas Rods) AWS A/SFA 5-10-88:ER 4043.



Suitable for welding a wide range of cast and wrought aluminium alloys containing up to 5% magnesium. Particularly suited to Tig welding (with argon shielding gas). Use with aluminium flux for oxy-acetylene welding.

Gas & Tig Welding Rods

General purpose steel rod for high grade oxy-acetylene welding of mild steel and wrought iron. Widely used for automobile, heating and ventilation. No flux required. Melts at 1490C.

Saffire Copper Coated Mild Steel

Electrodes for Mild Steels

Arc welding rods for mild and medium tensile steels

Fincord M 6013

Medium rutile coated, all positional rods. Minimum spatter. Applications: For steel plate and strip including strutural steels.

Electrodes for Mild Steels

Arc welding rods for mild steel and medium tensile steels.

Zodian Universal 6013

Medium rutile coated, all positional rods.
Applications: for stainless plate structural steels, pipe work and vessels. Ideal for food industry, chemical, pharmaceutical and processing plant fabrications.
NB suitable for AC (50V minimum open circuit) and DC+

Gas & Tig Welding Rods

General purpose steel rod for high grade oxy-acetylene welding steel and wrought iron. Widely used for automobile, heating and ventilation industries. No Flux required. Melts at 1490C.

Sifsteel No.11 Copper Coated Mild Steel - BS1453 A1

0.8% Zirconiated White Tungsten Electrodes

Ideal for high precision, exceptional quality AC welding on aluminium alloys as it retains a balled tip and has a high resistance to contamination. The current carrying capability is equal or greater than that of thoriated tungsten. Non-radioactive. Not suitable for DC welding.

Kennedy 4.0mm 0.8% Zirconiated White Tungsten Electrodes

Zirconiated tungsten electrodes (AWS classification EWZr-1) contain a minimum of 99.10% tungsten and .15 to .40% zirconium. A zirconium oxide (zirconia) alloyed tungsten electrode is
preferred for AC welding when the highest quality work is necessary and where even the smallest amounts of weld pool contamination cannot be tolerated. This is accomplished because the zirconium alloyed tungsten produces an extremely stable arc which resists tungsten spitting in the arc. The current carrying capability is equal to or slightly greater than an equal sized cerium, lanthana or thorium alloyed
electrode. Zirconium electrodes are typically used only for
AC welding with a balled end. Not to be used for DC welding.

Electrodes for Mild Steels

Arc welding rods for mild and medium tensile steels

Fincord M 6013

Medium rutile coated, all positional rods. Minimum spatter. Applications: For steel plate and strip including strutural steels.

Aluminium Mig Wire Reels

Designed and packaged for `spool-on` Guns. also compatible for use on Kennedy Dual Mig welders, Mini Migs, Migmates etc. for aluminium alloys. For use with Ar or Ar-He shielding gas. Random wound.

Al-Si 5%

Available in 0.8mm diameter. 0.5kg mini reel. Made to BS 2901/1 : 1983 4043A & AWS A5.10-92 ER 4043. For wrought and cast alloys with up to 7% silicon content.

SWP Drying Ovens

SWP drying ovens - the efficiency of welding electrodes can be seriously impaired if the electrode coating is exposed to a damp environment. Dampness can cause water to be generated in the arc shield, which could adversely effect the running quality of the electrode by promoting excessive spatter and ultimately the quality of the weld by creating porosity and piping. SWP offer you a range of drying ovens to suit many locations and needs.

1141 240V Electrode Quiver

The heated electrode quiver is designed for use on installations with a 110 volt or 240 volt supply (3 models available: 110V, 240V and Dual 110/240V). The quiver will maintain an even temperature of 100C approx. dependent on the amount of electrodes stored.
Voltage: 110, 240V or Dual 110/240V.
Load: 150W.
Overall dimensions:
(W x D x H)
120 x 500 x 110mm.

Oven capacity: 9kg.
Oven weight: 3kg.