Norbar Torque Wrenches

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS).

1/2" Square Drive 'P' Type Ratchet (Pre-set)

Designed for the production environment where they will be set and then dedicated to a particular application. There is no scale, the wrench must be set against a Torque Wrench Analyser or similar instrument. Setting system is designed to discourage unauthorised alteration. Coloured end seals are provided to identify the wrench to a particular operator, torque setting or calibration period. With reversible ratchets.

Torque Range: 20-200Nm 15-150ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

16mm Spigot End Fittings

Metric

Open End

16mm Spigot End Fittings

Metric

Open End

1/4", 3/8" Square Drive Adjustable Ratchet Fixed Head (Push Through)

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



72 tooth fine ratchet mechanism which allows use in confined areas. Incorporating "click" sound and "snap" feel to indicate when torque setting has been reached. Knurled disc on the ratchet head to reverse ratchet direction. Clear plastic handle protects the scale from accidental damage. Torque setting can be altered by rotating the adjustment lever at the base of the wrench. Pre-set "P" type versions available to eliminate the torque setting being altered on the production line. Fixed head version has push square drive for instant direction reversal. All with ratchet except 11125 which is non-ratchet.

Torque Range: 4-20Nm 40-180ibf.in

For further specification on this product please see the attached PDF under the additional information tab.

Norbar Torque Wrenches

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS).

16mm Spigot 'P' Type (Pre-set)

Designed for the production environment where they will be set and then dedicated to a particular application. There is no scale, the wrench must be set against a Torque Wrench Analyser or similar instrument. Setting system is designed to discourage unauthorised alteration. Coloured end seals are provided to identify the wrench to a particular operator, torque setting or calibration period.

Torque Range: 30-300Nm 22-220ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

16mm to 22mm 72000 Spigot Adaptor

For the Norbar SLO/TH Spigot Adjustable Fixed Head (Push Through) Torque Wrench illustrated (NBD-555-1301A)

16mm Spigot End Fittings

Metric

Open End

16mm Spigot End Fittings

Inch

Open End

Norbar Torque Wrenches

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS).

1/2" Square Drive 'P' Type Ratchet (Pre-set)

Designed for the production environment where they will be set and then dedicated to a particular application. There is no scale, the wrench must be set against a Torque Wrench Analyser or similar instrument. Setting system is designed to discourage unauthorised alteration. Coloured end seals are provided to identify the wrench to a particular operator, torque setting or calibration period. With reversible ratchets.

Torque Range: 8-60Nm 5-45ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

16mm Spigot End Fittings

Metric

Flare End