16mm Spigot End Fittings

Metric

Flare End

16mm Spigot

1/2" Ratchet C/W Push Through Square Drive

16mm Spigot End Fittings

Metric

Open End

Dial Indicating Torque Drivers

Can indicate torque in two ways - measures and displays torque as it is applied, or measures and displays the maximum torque used, after it has been applied. Ideal for the electronics, electrical and domestic appliance industries. Stainless steel shafts coloured aluminium handles and scaled nylon dials. 1/4" Hex drive. Dual scale. Manufactured to ISO6789:1992.

Minor Type

16mm Spigot End Fittings

Metric

Flare End

Norbar Torque Wrenches

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS).

1/2" Square Drive Professional Adjustable

Incorporates 'click' sound and 'snap' feel to indicate when torque setting has been reached. Sliding switch on the ratchet head for instant direction reversal (except model 300 and 330, which has a push through square drive). Setting lock to prevent accidental adjustment of the torque setting. Scale located within handle Nm/lbf.ft graduated (kgf.m or ibf.in scale also available, supplied to order). Accuracy to 3%. Supplied in sturdy blow moulded box for protection. Supplied with a traceable calibration certificate to satisfy the requirements of ISO 9000 quality systems. With ratchet.

Torque Range: 60-330Nm 45-250ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

16mm Spigot End Fittings

Metric

Open End

Mini 1/4 " A/F Female hexagon socket Torque Limiting Screwdriver

1/4 " A/F Female hexagon socket which will accept screwdriver bits. Can be converted to a Male end by using the appropriate adaptor. Can be pre-set to any torque value within range by using a Torque Calibration Analyser. Can be fitted with 'Impact Free Resetting' option. Range: 2-135cN.m. 3ozf.in - 12lbf.in.
Overall length: 200mm.
Weight: 200g.

16mm Spigot End Fittings

Metric

Open End

1/4", 3/8" Square Drive Adjustable Ratchet Fixed Head (Push Through)

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



72 tooth fine ratchet mechanism which allows use in confined areas. Incorporating "click" sound and "snap" feel to indicate when torque setting has been reached. Knurled disc on the ratchet head to reverse ratchet direction. Clear plastic handle protects the scale from accidental damage. Torque setting can be altered by rotating the adjustment lever at the base of the wrench. Pre-set "P" type versions available to eliminate the torque setting being altered on the production line. Fixed head version has push square drive for instant direction reversal. All with ratchet except 11125 which is non-ratchet.

Torque Range: 4-20Nm 40-180ibf.in

For further specification on this product please see the attached PDF under the additional information tab.