Kennedy Torque Wrenches

Kennedy?s fixed torque wrenches have been designed for use on production lines and for other applications where a specific torque is required for repetitive operations.

Fixed Head Torque Wrench

Features include:

Chrome plated, polished steel head.
Retractable torque setting lever.
CLICK & SNAP action indicates when the pre-set torque level has been reached. Four easy read scales N.m, kgf.m, lbf.in x10, lbf.ft
Push through square drive connector to instantly reverse action.
Knurled grip plastic handle.
Complete with factory tested calibration certificate, operating instructions and torque conversion chart.
Supplied in blow moulded cases, except FTW800, which is in a cardboard case.
Manufactured to ISO 6789 : 1992 (BS EN 26789 : 1994).
Accuracy plus/minus 4%.

For further specification on this product please see the attached PDF under the catalogue PDF links tab.

Ratchet Repair Kit

For the Tri Torq FXL100 Fixed Length Torque Wrench illustrated (TRQ-557-5900K)

Nut Spinners

Manufactured from hardened and tempered chrome vanadium steel, with satin chrome finish. Oil and acid resistant high impact plastic handles 6?? (150mm), combined socket and blade length. Overall length: 230mm.

Inch (BA)

16mm Spigot End Fittings

Metric

Open End

Nut Spinners

Manufactured from hardened and tempered chrome vanadium steel, with satin chrome finish. Oil and acid resistant high impact plastic handles 6?? (150mm), combined socket and blade length. Overall length: 230mm.

Metric

Norbar Torque Wrenches

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS).

1/2" Square Drive Professional Adjustable

Incorporates 'click' sound and 'snap' feel to indicate when torque setting has been reached. Sliding switch on the ratchet head for instant direction reversal (except model 300 and 330, which has a push through square drive). Setting lock to prevent accidental adjustment of the torque setting. Scale located within handle Nm/lbf.ft graduated (kgf.m or ibf.in scale also available, supplied to order). Accuracy to 3%. Supplied in sturdy blow moulded box for protection. Supplied with a traceable calibration certificate to satisfy the requirements of ISO 9000 quality systems. With ratchet.

Torque Range: 40-200Nm 30-150ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

22mm Spigot End Fittings

Metric

Open End

16mm Spigot End Fittings

Inch

Open End

Norbar Torque Wrenches

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS).

3/8" Square Drive Professional Adjustable

Incorporates 'click' sound and 'snap' feel to indicate when torque setting has been reached. Sliding switch on the ratchet head for instant direction reversal (except model 300 and 330, which has a push through square drive). Setting lock to prevent accidental adjustment of the torque setting. Scale located within handle Nm/lbf.ft graduated (kgf.m or ibf.in scale also available, supplied to order). Accuracy to 3%. Supplied in sturdy blow moulded box for protection. Supplied with a traceable calibration certificate to satisfy the requirements of ISO 9000 quality systems. With ratchet.

Torque Range: 20-100Nm 15-80ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

Angular Torque Gauges

For tightening components to a specific torque. Easy read non-reflective graduated surface. 1/2" square drive.

Torque Range: 0-360Nm

For further specification on this product please see the attached PDF under the additional information tab.